Make sure this part fits

GM 15289910
Filler Neck

2005-2006 GM

Customer Questions & Expert Answers (11)
GM 15289910 Filler Neck
  • Part Description
    Pipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2006 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2005-2006 Chevrolet Silverado 2500 HDBase, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2005-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2005-2006 GMC Sierra 1500Base, Denali, Hybrid, SL, SLE, SLT, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006 GMC Sierra 1500 HDSLE, SLT8 Cyl 6.0 L GAS
    2005-2006 GMC Sierra 2500 HDBase, SL, SLE, SLT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2005-2006 GMC Sierra 3500Base, SL, SLE, SLT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15289910 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15289910 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done with the ground wires for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Reposition the fuel tank fill pipe ground wire and chassis harness ground wire.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    Q:
    What is the first step in the installation process for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Attach the fuel fill and vent hoses to the tank.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    Q:
    What is the final step if equipped with a rear auxiliary tank for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Remove the caps from the fuel feed and EVAP pipes and reconnect the fuel and EVAP quick connect fittings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    Q:
    What is the first step to replace the filler tube on a cab/chassis front for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    First, relieve the fuel system pressure.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    Q:
    What is the final step after installing the pipes for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Finally, remove the caps from the fuel feed and EVAP pipes and reconnect the fuel and EVAP quick connect fittings if applicable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    Q:
    What is the first step to replace the exhaust muffler for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Begin by removing the fuel tank filler housing to body TORX(R) screws and retainer, followed by the bolts connecting the fuel tank filler housing to the fuel tank fill pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    Q:
    What is the final step after securing the ground wire for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Lower the vehicle and reinstall the fuel tank filler housing, securing it with the fuel tank filler housing to fuel tank fill pipe bolts tightened to 2.3 N.m (20 lb in) and the TORX(r) screws and pushpin retainer also tightened to 2.3 N.m (20 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    Q:
    What is the final step in the installation process for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Install the fuel tank filler housing to body screws and retainer, also tightening to 2.3 N.m (20 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    Q:
    What is the next step after loosening the hose clamps for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Remove the fuel fill and vent hoses from the tank.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    Q:
    What should be done with the fuel tank fill pipe clamp for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Loosen the fuel tank fill pipe clamp at the fuel tank and disconnect the recirculation line from the sending unit before removing the fuel tank fill pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Filler Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Filler Neck 15289910 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15289910 Filler Neck is available in the market under the name GM Fuel Filler Hose, Fuel Tank Filler Neck. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15289910 Filler Neck fits certain Chevrolet Silverado 1500, Silverado 2500 HD, Silverado 3500 models, as well as GMC Sierra 1500, Sierra 2500 HD, Sierra 3500 models.
The original GM component designated by manufacturer part number 15289910 maintains top performance when functioning as the Pipe Assembly-Fuel Tank Filler; Fuel Tank Filler Neck; Fuel Filler Hose unit. The component 15289910 is constructed from durable material and its dimensions span 23.7 x 9.7 x 8.8 inches while weighing 2.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Filler Pipe; Pipe, Fuel Tank Filler. The part 15289910 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.