Make sure this part fits

GM 10328873
Nameplate

2002-2007 Buick Rendezvous

Customer Questions & Expert Answers (9)
GM 10328873 Nameplate
  • Part Description
    Plate, Hood Panel Ornamentation
  • Replaced By
    10318273
  • Manufacturer
    General Motors
Make sure this part fits
$59.94 MSRP: $89.22
You Save: $29.28 (33%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10328873 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10328873 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Change the Emblem on the Grille of a Buick Rendezvous? Posted by Customer
    A:
    Start by removing the front fascia grille according to the procedures for Fascia Grille Replacement (Aztek) or Fascia Grille Replacement (Rendezvous). Start by removing the back grille emblem's nut followed by extraction of the emblem itself. Place the new emblem onto the grille then secure it with the nut by tightening it up to 2 N.m (18 lb in). The last step requires refitting the front fascia grille through proper implementation of either Fascia Grille Replacement (Aztek) or Fascia Grille Replacement (Rendezvous) methods.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the grille emblem on Buick Rendezvous? Posted by Customer
    A:
    A step-by-step procedure for Front Fascia Grille Replacement can be found in Fascia Grille Replacement (Aztek) or Fascia Grille Replacement (Rendezvous). First separate the emblem from its mounting points by removing the back nut and finally pull off the front emblem. Position the new emblem on the grille before installing the nut and converting torque to 2 N.m (18 lb in). To reinstall the grille start by following the Front Fascia Grille Replacement procedures for both Aztek and Rendezvous models.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the location for the emblem/nameplate be marked if it is unmarked for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Apply tape to indicate where the emblem/nameplate will go.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the final step in positioning the emblem/nameplate for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Remove the protective liner and position the emblem/nameplate according to the marks, applying equal pressure to bond it to the surface before removing the protective tape.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What temperature should the liftgate surface be warmed to for the 2002 Buick Rendezvous? Posted by Customer
    A:
    A minimum of 21°C (70°F).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the first step in the replacement process for the 2004 Buick Rendezvous? Posted by Customer
    A:
    Apply tape around the door emblem for protection and alignment.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What are the installation measurements for the CX and CXL emblems/nameplates for the 2007 Buick Rendezvous? Posted by Customer
    A:
    19.05 mm (0.75 in) from the top of the liftgate lower molding to the bottom and 53.975 mm (2.125 in) from the side to the right edge of the liftgate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How should the emblem/nameplate be heated for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Use the Heat Gun (J 25070) positioned 152 mm (6.0 in) from the surface, using a circular motion for about 30 seconds.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Nameplate 10328873 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10328873 Nameplate is available in the market under the name GM Emblem. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10328873 Nameplate fits certain Buick Rendezvous models.
The original GM component designated by manufacturer part number 10328873 maintains top performance when functioning as the Plate, Hood Panel Ornamentation unit. The component 10328873 is constructed from durable material and its dimensions span 4.1 x 4.2 x 39.6 inches while weighing 0.80 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. The part 10328873 has available replacement options listed under 10318273. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.