Make sure this part fits

GM 15833881
Drive Shaft

2002-2009 GM

Customer Questions & Expert Answers (12)
GM 15833881 Drive Shaft
  • Part Description
    Shaft Assembly-Propeller; Driveshaft
  • Replaces
    15152336
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face6 Cyl 4.2 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15833881 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15833881 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the propeller shaft be installed for the 2007 Buick Rainier? Posted by Customer
    A:
    Install it into the transmission or transfer case, aligning the reference marks made during removal, then install it to the rear axle pinion yoke, again aligning the reference marks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What precautions should be taken when removing the yoke for the 2004 Buick Rainier? Posted by Customer
    A:
    Avoid pounding on the yoke ears or using a tool between the yoke and the universal joint to prevent fracturing the injection joints.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be done after disconnecting the propeller shaft for the 2007 Buick Rainier? Posted by Customer
    A:
    Wrap the bearing caps with tape to prevent loss of bearing rollers, then remove the front propeller shaft from the transfer case.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the next step after marking the components for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Raise the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be inspected on the transfer case output shaft for the 2002 GMC Envoy? Posted by Customer
    A:
    Inspect the splines for a sufficient coating of grease; if necessary, lubricate with grease (GM P/N 12377985 or equivalent).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be done after placing the propeller shaft in the transfer case for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    Attach the propeller shaft to the front axle pinion yoke, install the yoke retainers and bolts, and tighten the front propeller shaft yoke clamp bolts to 20 Nm (15 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be done after marking the driveline components for the 2008 GMC Envoy? Posted by Customer
    A:
    Raise the vehicle and remove the steering gear crossmember.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    Why is it important to reference mark the components for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    To ensure they are reassembled in the same relationship as removed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What should be done after installing the propeller shaft for the 2004 GMC Envoy? Posted by Customer
    A:
    Install the clamps and retaining bolts, tightening the retaining bolts to 20 Nm (15 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the first step to replace the rear propeller shaft for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Observe and accurately reference mark all driveline components relative to the propeller shaft and axles before disassembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    Q:
    What is the final step after completing the installation for the 2009 GMC Envoy? Posted by Customer
    A:
    Reinstall the steering gear crossmember and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Drive Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Drive Shaft 15833881 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15833881 Drive Shaft is available in the market under the name GM Drive Shaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15833881 Drive Shaft fits certain Chevrolet Trailblazer models, as well as GMC Envoy. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15833881 maintains top performance when functioning as the Shaft Assembly-Propeller; Driveshaft unit. The component 15833881 is constructed from durable material and its dimensions span 61.0 x 4.1 x 4.3 inches while weighing 14.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Shaft, Propeller. The part 15833881 has available replacement options 15152336. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.