Make sure this part fits

GM 15098153
Upper Control Arm, Rear

2002-2009 GM

Customer Questions & Expert Answers (14)
GM 15098153 Upper Control Arm, Rear
  • Part Description
    Arm, Rear Axle Control Arm; Suspension Control Arm
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2007 Buick RainierCXL8 Cyl 5.3 L GAS
    2002-2008 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15098153 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15098153 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you secure the upper ball joint to the upper control arm for the 2006 Buick Rainier? Posted by Customer
    A:
    Install the upper ball joint to upper control arm pinch bolt and nut, tightening it to 40 Nm (30 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you secure the rear axle lower control arm to the frame for the 2006 Buick Rainier? Posted by Customer
    A:
    Use the mounting nut and bolt to secure it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What are the final steps after installing the rear axle upper control arm for the 2007 Buick Rainier? Posted by Customer
    A:
    Remove the rear axle support, install the wheelhouse panel, and then the tire and wheel before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the upper control arm for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you remove the rear axle lower control arm for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    Detach the nut and bolt from the axle mounting and then from the frame mounting, followed by removing the lower control arm itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after installing the rear axle upper control arm to frame mounting bolt for the 2003 GMC Envoy? Posted by Customer
    A:
    Install the rear axle upper control arm to axle mounting nut and bolt, tightening the rear axle upper control arm mounting bolts to 130.5 Nm (96 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the procedure for removing the lower control arm for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Pivot the lower control arm outward and downward to disconnect it from the lower control arm bracket, ensuring not to disengage the axle shaft from the transmission (4WD only), and then remove the lower control arm from the steering knuckle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should you note when removing the lower control arm to lower control arm bracket mounting nuts for the 2007 GMC Envoy? Posted by Customer
    A:
    Note the direction of the bolts for installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step in the installation process of the new upper control arm for the 2008 GMC Envoy? Posted by Customer
    A:
    Place the new upper control arm in position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after installing the rear axle upper control arm for the 2006 GMC Envoy? Posted by Customer
    A:
    Install the rear axle upper control arm to frame mounting bolt, and then the rear axle upper control arm to axle mounting nut and bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step in the installation of the lower control arm for the 2006 GMC Envoy? Posted by Customer
    A:
    Position the lower control arm ball joint stud to the steering knuckle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the final step after installation for the 2005 GMC Envoy? Posted by Customer
    A:
    Remove the rear axle support and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you access the forward-facing bolt of the upper control arm for the 2009 GMC Envoy? Posted by Customer
    A:
    Gently pry out on the inner fender body panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Upper Control Arm, Rear 15098153 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15098153 Upper Control Arm, Rear is available in the market under the name GM Control Arm, Trailing Arm. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15098153 Upper Control Arm, Rear fits certain Chevrolet Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15098153 maintains top performance when functioning as the Arm, Rear Axle Control Arm; Suspension Control Arm unit at its Rear. The component 15098153 is constructed from durable material and its dimensions span 20.5 x 2.9 x 2.8 inches while weighing 4.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Control Arm. The part 15098153 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 15098153. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.