Make sure this part fits

GM 10191640
Thermostat Housing Gasket, Front

1984-2002 GM

Customer Questions & Expert Answers (14)
GM 10191640 Thermostat Housing Gasket, Front
GM 10191640 Thermostat Housing Gasket, Front
  • Part Description
    Seal, Engine Front Cover & Crankshaft Seal; Timing Cover Gasket; Timing Cover Seal
  • Position
    Front
  • Replaces
    23500286, 3860095, 03860095
  • Manufacturer
    General Motors
Make sure this part fits
$20.61 MSRP: $33.96
You Save: $13.35 (40%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1994, 1987-1991 Chevrolet BlazerBase, Custom Deluxe, Scottsdale, Silverado, Silverado Sport8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
    1984-1986 Chevrolet C10Custom, Scottsdale, Silverado8 Cyl 6.2 L DIESEL
    1984-1986 Chevrolet C10 SuburbanCustom, Scottsdale, Silverado8 Cyl 6.2 L DIESEL
    1988-1998 Chevrolet C1500454 SS, Base, Cheyenne, Scottsdale, Silverado, WT8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1994-1999 Chevrolet C1500 SuburbanBase, LS, LT, Silverado8 Cyl 6.5 L DIESEL
    1984-1986 Chevrolet C20Custom, Scottsdale, Silverado8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
    1984-1986 Chevrolet C20 SuburbanCustom, Scottsdale, Silverado8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
    1988-2000 Chevrolet C2500Base, Cheyenne, LS, Scottsdale, Silverado, WT8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1992-1999 Chevrolet C2500 SuburbanBase, LS, LT, Silverado8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1984-1986 Chevrolet C30Custom, Scottsdale, Silverado8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10191640 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10191640 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service and repair the Main Bearing Crankshaft Seal on Chevrolet K3500? Posted by Customer
    A:
    Beginnings of Crankshaft main bearing seal servicing require disconnecting the battery's negative cable from its battery source. Secure the vehicle by lifting it up then use safety stands for support. Begin by removing the transmission from the vehicle yet keep to proper procedures that apply to automatic or manual transmissions. First disconnect the Flywheel and then the clutch from the Crankshaft when these components are equipped. It's vital to avoid damaging the Crankshaft sealing surface while extracting the Crankshaft rear oil seal from the engine block. As directed by tool j 38841 the rear oil seal installer helps install the new Crankshaft rear oil seal. New engine oil serves to lubricate both surfaces of the seal which requires application before seal installation. Install the Flywheel onto the Crankshaft after using the j 38841 tool to position the new Crankshaft rear oil seal. If your transmission includes a clutch then install the clutch immediately after reattaching the Flywheel. Lower the vehicle and reposition the transmission to the engine block after which securely reattach the battery negative cable to the battery.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Service and Repair the Crankshaft Seal on GMC C3500? Posted by Customer
    A:
    You should first remove the Transmission Assembly and then take out the Flywheel to service the crankshaft main bearing seal. Loose the attachment of the Oil Pan and withdraw the rear seal of the crankshaft from the casing. Install the new oil seal by using the j 35621-b (Crankshaft Rear Oil Seal Installer) and then put back the rear oil seal. Afterwards, secure the Oil Pan, put the Flywheel in place and insert the final Transmission Assembly.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is important to ensure when installing a new crankshaft rear oil seal housing for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Ensure the new seal comes with it and install a new gasket without oiling or greasing the seal lip or crankshaft seal area.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What should be done after removing the transmission assembly for the 2001 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the flywheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the first step to replace the crankshaft rear oil seal for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the transmission assembly and the engine flywheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What should be verified before reinstalling the crankshaft balancer for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Verify that the crankshaft front seal is flush and square to the engine front cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    How should the new crankshaft front cover oil seal be prepared for installation for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Use the J 22102 Seal Installer to coat the new crankshaft front cover oil seal with clean engine oil.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the final step after installing the new oil seal for the 2000 GMC C2500? Posted by Customer
    A:
    Reinstall the flywheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What tool is used for installing the new crankshaft front oil seal for the 2000 GMC C2500? Posted by Customer
    A:
    Use the Crankshaft Front Oil Seal Installer (J41478).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What tool should be used to remove the crankshaft front oil seal for the 2001 GMC Savana 3500? Posted by Customer
    A:
    Use a suitable prying tool to remove the crankshaft front oil seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the final step in the process for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Install the transmission assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What should be inspected after removing the crankshaft front oil seal for the 2002 GMC Savana 3500? Posted by Customer
    A:
    The engine front cover seal bore and the crankshaft balancer sealing surface for any damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    Q:
    What is the first step to service and repair the crankshaft main bearing seal for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Remove the transmission assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Crankshaft Seal
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Thermostat Housing Gasket, Front 10191640 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10191640 Thermostat Housing Gasket, Front is available in the market under the name GM Crankshaft Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10191640 Thermostat Housing Gasket, Front fits certain Chevrolet C10, Tahoe, Blazer models, as well as GMC Yukon, C1500, C2500 models.
The original GM component designated by manufacturer part number 10191640 maintains top performance when functioning as the Seal, Engine Front Cover & Crankshaft Seal; Timing Cover Gasket; Timing Cover Seal unit at its Front. The component 10191640 is constructed from durable material and its dimensions span 3.8 x 3.7 x 0.6 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Timing Cover Oil Seal; Cover Seal; Front Cover Seal; Seal, Engine Crankshaft Front. The part 10191640 has available replacement options 23500286, 3860095, 03860095. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.