Make sure this part fits

GM 15039531
Front Seal

1994-2005 GM

Customer Questions & Expert Answers (15)
GM 15039531 Front Seal
GM 15039531 Front Seal
  • Part Description
    Seal, Hood Panel
  • Position
    Front
  • Replaces
    15000152, 15709024
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1995-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme, ZR26 Cyl 4.3 L GAS
    1994-2004 Chevrolet S10Base, LS, SS, Xtreme, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1995-2001 GMC JimmyBase, Diamond Edition, Envoy, SL, SLE, SLS, SLT6 Cyl 4.3 L GAS
    1994-2004 GMC SonomaSL, SLE, SLS4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1996-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS, 6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15039531 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15039531 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done while applying the seal for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Remove the tape backing as the seal is applied.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the weatherstrip for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Reinstall the sunroof window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you install the new door opening weatherstrip for the 2004 Chevrolet Blazer? Posted by Customer
    A:
    Position the pre-formed corner in the upper rear corner of the door opening and push the weatherstrip onto the pinch weld flange, starting at the pre-formed corner and working around the entire edge of the door opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the tailgate weatherstrip for the 2002 Chevrolet S10? Posted by Customer
    A:
    Open the liftgate window and firmly grip the weatherstrip to pull it off the pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the sunroof seal/molding for the 2003 Chevrolet S10? Posted by Customer
    A:
    First, remove the sunroof window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the old weatherstrip for the 2002 Chevrolet S10? Posted by Customer
    A:
    Take the new weatherstrip and remove the adhesive backing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the rear hood weatherstrip seal for the 2004 Chevrolet S10? Posted by Customer
    A:
    Remove the screws securing the seal to the cowl.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be ensured after installing the new weatherstrip for the 2002 Chevrolet S10? Posted by Customer
    A:
    It should be ensured that the retaining clips lock securely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after removing the old weatherstrip for the 2000 GMC Jimmy? Posted by Customer
    A:
    Position the new weatherstrip and press it into place before closing the window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the next step after removing the old weatherstrip for the 2000 GMC Jimmy? Posted by Customer
    A:
    Install the new rear side door weatherstrip by locating the butt joint at the bottom center of the window opening and setting the weatherstrip around the window opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you remove the door opening weatherstrip for the 2001 GMC Jimmy? Posted by Customer
    A:
    Gently pull it from the pinch weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the hood front weatherstrip seal for the 2003 GMC Sonoma? Posted by Customer
    A:
    Use a flat-bladed tool to carefully pry the seal assembly away from the flange and remove the seal from the hood.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after reinstalling the sunroof window for the 2004 GMC Sonoma? Posted by Customer
    A:
    Fully close the sunroof window and allow the silicone adhesive to dry for 4-6 hours at room temperature.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    Where should the seam of the weatherstrip be positioned during installation for the 2004 GMC Sonoma? Posted by Customer
    A:
    The seam should be positioned at the center of the rear edge of the sunroof window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Front Seal 15039531 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15039531 Front Seal is available in the market under the name GM Weather Strip. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15039531 Front Seal fits certain Chevrolet S10, Blazer models, as well as GMC Sonoma, Jimmy. Additionally, it is compatible with Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15039531 maintains top performance when functioning as the Seal, Hood Panel unit at its Front. The component 15039531 is constructed from durable material and its dimensions span 44.1 x 3.6 x 0.6 inches while weighing 1.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 15039531 has available replacement options 15000152, 15709024. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.