Make sure this part fits

GM 10232754
Lower Weatherstrip

1997-2008 GM

Customer Questions & Expert Answers (16)
GM 10232754 Lower Weatherstrip
  • Part Description
    Sealing Strip, Door Weatherstrip; Door Seal
  • Position
    Front Bottom
  • Manufacturer
    General Motors
Make sure this part fits
$5.79 MSRP: $8.62
You Save: $2.83 (33%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1997-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    1999-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    1997-1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10232754 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10232754 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should you avoid using when installing the new sliding door opening weatherstrip for the 2006 Buick Terraza? Posted by Customer
    A:
    Do not use weatherstrip adhesive if the new weatherstrip contains mastic/sealer/glue; use adhesive only if using the old weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What temperature should the body panel be warmed to for the 2007 Buick Terraza? Posted by Customer
    A:
    A minimum of 21°C (70°F) using a heat lamp or heat gun.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How is the replacement weatherstrip described for the 2006 Buick Terraza? Posted by Customer
    A:
    The replacement weatherstrip is a cut-to-fit part that must be trimmed to fit the window opening and joined together.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after heating the weatherstrip for the 2005 Buick Terraza? Posted by Customer
    A:
    Carefully peel the weatherstrip from the panel surface with a flat-bladed tool, ensuring not to damage the paint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after heating the weatherstrip for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Carefully peel the weatherstrip from the panel surface with a flat-bladed tool, ensuring not to damage the paint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the sill plates for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Pull the weatherstrip from the front door pinch-weld flange and clean all adhesive from the flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How do you align the new weatherstrip for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Align the locator dot to the upper front corner and upper rear corners of the pinch-weld flange, with the pink dot indicating a long wheel base and the yellow dot indicating a short wheel base.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do if reusing the weatherstrip for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Apply adhesive to the reused weatherstrip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How is the rear quarter window weatherstrip described for the 2001 Chevrolet Venture? Posted by Customer
    A:
    It is a cut-to-fit part that must be trimmed to fit the window opening and joined together.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the rear quarter window weatherstrip be installed for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Install the forward joint of the rear quarter window weatherstrip to the vehicle, ensuring it is aligned 50 mm (1.96 in) from the front lower window opening radius.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What tool is needed to remove the bottom auxiliary weatherstrip from the front door for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Use the Door Trim Pad and Garnish Clip Remover (J 38778).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the weatherstrip be installed for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Ensure the joint is aligned with the center of the rear quarter window latch attachment point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the sliding door auxiliary weatherstrip for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    Fully open the sliding rear door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after installing the weatherstrip and seals for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Press everything into place until fully seated to the fender.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after heating the weatherstrip for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Carefully peel the weatherstrip from the panel surface with a flat-bladed tool, ensuring not to damage the paint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lower Weatherstrip 10232754 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10232754 Lower Weatherstrip is available in the market under the name GM Weather Strip, Door Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10232754 Lower Weatherstrip fits certain Chevrolet Uplander, Venture models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana, Trans Sport and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 10232754 maintains top performance when functioning as the Sealing Strip, Door Weatherstrip; Door Seal unit at its Front Bottom. The component 10232754 is constructed from durable material and its dimensions span 41.0 x 3.7 x 1.4 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Lower Seal Strip; Sealing Strip, Side Door Opening; Weatherstrip. The part 10232754 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 10232754. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.