Make sure this part fits

GM 19351884
Mass Air Flow Sensor

2003-2016 GM

Customer Questions & Expert Answers (8)
GM 19351884 Mass Air Flow Sensor
GM 19351884 Mass Air Flow Sensor
  • Part Description
    Sensor Assembly, Mass Airflow
  • Replaces
    12574383, 23309433, 15926193
  • Manufacturer
    General Motors
Make sure this part fits
$111.62 MSRP: $199.32
You Save: $87.70 (44%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2014 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2016 Chevrolet Express 2500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
    2003-2016 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
    2003-2014 GMC Savana 1500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2016 GMC Savana 2500Base, LS, LT, SLE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
    2003-2016 GMC Savana 3500Base, LS, LT, SLE8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19351884 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19351884 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Mass Air Flow Sensor and Intake Air Temperature Sensor on Chevrolet Express 1500? Posted by Customer
    A:
    The first step involves disconnecting the maf/iat sensor connection while removing the air cleaner assembly. First loosen the clamp holding the maf/iat sensor to the air cleaner duct before removing the sensor bolts from the air cleaner assembly to extract the maf/iat sensor from its location. The maf/iat sensor installation process requires the installation of the sensor in the correct direction where the embossed arrow points towards the engine to show correct airflow. Mount the maf/iat sensor onto the air cleaner housing and fasten it with bolts tightened to 11 n.m (97 lb in). The maf/iat sensor clamp requires tightening before reconnecting the air cleaner assembly with air cleaner duct placement and attachment of the maf/iat electrical connector.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Mass Air Flow Sensor on Chevrolet Express 3500? Posted by Customer
    A:
    Replacement of the Mass Air Flow Sensor (MAF)/intake air temperature (IAT) sensor begins with disconnecting its electrical connector and removing the air cleaner assembly. Start by releasing the clamp around the Mass Air Flow Sensor/iat sensor located in the air cleaner duct. After this, remove the bolts from the sensor which inserts into the air cleaner assembly to successfully extract the Mass Air Flow Sensor/iat sensor from the air cleaner. The embossed arrow on the Mass Air Flow Sensor/iat sensor should face the engine direction before the sensor can be installed onto the air cleaner housing using retaining bolts that require 11 n.m (97 lb in) of torque force. To install the Mass Air Flow Sensor/iat sensor first fasten the clamp before reattaching the air cleaner assembly to its place and attaching the Mass Air Flow Sensor/iat electrical connector. You must handle the Mass Air Flow Sensor/iat sensor with care to protect the honeycell and sensing elements while applying a small amount of non-silicone based lubricant on the air duct to help with installation.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after tightening the clamps for the 2005 Chevrolet Express 2500? Posted by Customer
    A:
    Reconnect the MAF sensor harness connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Mass Air Flow Sensor
    Q:
    How should the MAF/IAT sensor be installed for the 2008 Chevrolet Express 3500? Posted by Customer
    A:
    Ensure the embossed arrow on the MAF/IAT sensor points toward the engine, then install the sensor onto the air cleaner housing, securing it with the retaining bolts tightened to 11 N.m (97 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Mass Air Flow Sensor
    Q:
    What should be done after tightening the clamp for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    Reinstall the air cleaner assembly, and finally connect the MAF/IAT electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Mass Air Flow Sensor
    Q:
    What should be done after removing the air cleaner assembly for the 2003 GMC Savana 2500? Posted by Customer
    A:
    Loosen the clamp securing the MAF/IAT sensor to the air cleaner duct, then remove the MAF/IAT sensor bolts from the air cleaner assembly and take the MAF/IAT sensor out of the air cleaner.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Mass Air Flow Sensor
    Q:
    What is the next step after securing the MAF/IAT sensor for the 2006 GMC Savana 2500? Posted by Customer
    A:
    Tighten the clamp securing the MAF/IAT sensor to the air cleaner duct, reinstall the air cleaner assembly, and connect the MAF/IAT electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Mass Air Flow Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Mass Air Flow Sensor 19351884 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19351884 Mass Air Flow Sensor is available in the market under the name GM Mass Air Flow Sensor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19351884 Mass Air Flow Sensor fits certain Chevrolet Express 1500, Express 2500, Express 3500 models, as well as GMC Savana 2500, Savana 3500, Savana 1500 models.
The original GM component designated by manufacturer part number 19351884 maintains top performance when functioning as the Sensor Assembly, Mass Airflow unit. The component 19351884 is constructed from durable material and its dimensions span 6.1 x 5.3 x 5.1 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Air Mass Sensor; Sensor, Computer Control Sensors. The part 19351884 has available replacement options 12574383, 23309433, 15926193. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.