Make sure this part fits

GM 25846355
Splash Shield, Front

1999-2024 GM

Customer Questions & Expert Answers (11)
GM 25846355 Splash Shield, Front
GM 25846355 Splash Shield, Front
  • Part Description
    Shield-Front Brake; Brake Dust Shield
  • Position
    Front
  • Replaces
    15719023
  • Manufacturer
    General Motors
Make sure this part fits
$54.16 MSRP: $106.04
You Save: $51.88 (49%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2003-2024 Chevrolet Express 2500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    2003-2024 Chevrolet Express 3500Base, LS, LT4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
    2001-2007 Chevrolet Silverado 1500Base, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    1999-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2010 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25846355 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25846355 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after reinstalling the hub and bearing assembly for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Reinstall the tire and wheel assembly, remove the safety stands, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Dust Shields
    Q:
    What should be done after removing the park brake shoe for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Take off the backing plate nuts and detach the backing plate from the axle housing flange.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Backing Plate
    Q:
    What are the final steps after installing the backing plate for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Reinstall the rear axle shaft, the wheel cylinder, and the park brake cable, following the procedures for the left and right cables as previously mentioned.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Backing Plate
    Q:
    How do you install the new backing plate for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Position the backing plate on the rear axle housing and install the backing plate bolts, tightening them to 135 Nm (100 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Backing Plate
    Q:
    What is the first step in the installation process for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Position the backing plate on the rear axle housing, ensuring to adhere to the Fastener Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Backing Plate
    Q:
    What precaution should be observed during the process for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Observe brake dust precautions.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Dust Shields
    Q:
    What are the final steps after installing the backing plate for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Reinstall the rear axle shaft, the wheel cylinder, and the park brake cable, following the procedures for the left and right cables as previously mentioned.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Backing Plate
    Q:
    What product should be applied to the threads of the bolts for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Apply Threadlocker GM P/N 12345493 (Canadian P/N 10953488) to the threads.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Backing Plate
    Q:
    How do you install the new backing plate for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Attach the backing plate to the axle housing flange and install the backing plate nuts, ensuring to tighten them to 135 Nm (100 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Backing Plate
    Q:
    What components should be removed after detaching the park brake cable for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Remove the rotor, followed by the axle shaft, and then take out the park brake shoe.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Backing Plate
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Splash Shield, Front 25846355 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25846355 Splash Shield, Front is available in the market under the name GM Brake Backing Plate, Brake Dust Shields. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25846355 Splash Shield, Front fits certain Chevrolet Silverado 1500, Silverado 2500 HD, Express 2500 models, as well as GMC Sierra 1500, Sierra 2500 HD, Savana 2500. Additionally, it is compatible with Hummer H2 models.
The original GM component designated by manufacturer part number 25846355 maintains top performance when functioning as the Shield-Front Brake; Brake Dust Shield unit at its Front. The component 25846355 is constructed from durable material and its dimensions span 12.8 x 12.6 x 3.4 inches while weighing 1.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Shield, Brake Flange Plate. The part 25846355 has available replacement options 15719023. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.