Make sure this part fits

GM 15042464
Instrument Panel Speaker, Passenger Side

2002-2009 GM

Customer Questions & Expert Answers (21)
GM 15042464 Instrument Panel Speaker, Passenger Side
GM 15042464 Instrument Panel Speaker, Passenger Side
  • Part Description
    Speaker, Radio Receiver
  • Position
    Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15042464 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15042464 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after disconnecting the speaker electrical connector for the 2004 Buick Rainier? Posted by Customer
    A:
    Remove the speaker from the IP.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the process for installing the new speaker for the 2005 Buick Rainier? Posted by Customer
    A:
    Place the new speaker into the door and secure it with the 3 retaining bolts, tightening them to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step to replace the rear door speaker for the 2006 Buick Rainier? Posted by Customer
    A:
    First, remove the rear door trim panel and the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step to replace the rear side door speaker for the 2007 Buick Rainier? Posted by Customer
    A:
    Begin by removing the rear door trim panel and the water deflector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    How do you secure the new speaker for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Install the 3 retaining bolts and tighten them to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be done after removing the trim panel and water deflector for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Disconnect the speaker electrical connector and remove the 3 speaker retaining bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the installation process for the new speaker for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    Position the new speaker into the door and install the 3 retaining bolts, tightening them to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step to replace the front upper speaker for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the trim pad, ensuring that the speaker electrical connector does not fall into the speaker opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be done after removing the trim panel for the 2006 Chevrolet Trailblazer? Posted by Customer
    A:
    Disconnect the speaker electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be ensured while removing the screws for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Ensure that the speaker electrical connector does not fall into the opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the final step in the replacement process for the 2007 GMC Envoy? Posted by Customer
    A:
    Reconnect the speaker electrical connector and reinstall the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be done after removing the trim panel for the 2002 GMC Envoy? Posted by Customer
    A:
    Disconnect the speaker electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the next step after removing the screw for the 2004 GMC Envoy? Posted by Customer
    A:
    Remove the speaker along with the two tabs from the slots in the door and disconnect the speaker electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    How do you secure the new speaker for the 2003 GMC Envoy? Posted by Customer
    A:
    Install the 3 retaining screws and tighten them to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the final step in the process for the 2005 GMC Envoy? Posted by Customer
    A:
    Reinstall the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be ensured while removing the screws for the 2006 GMC Envoy? Posted by Customer
    A:
    Ensure that the speaker electrical connector does not fall into the opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be done after securing the new speaker for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Reconnect the speaker electrical connector and reinstall the front door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step to replace the front upper speaker for the 2008 GMC Envoy? Posted by Customer
    A:
    Remove the trim pad, ensuring that the speaker electrical connector does not fall into the speaker opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What needs to be disconnected before removing the speaker for the 2009 GMC Envoy? Posted by Customer
    A:
    Disconnect the speaker electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be done after removing the rear door trim panel for the 2004 GMC Envoy? Posted by Customer
    A:
    Take out the screw securing the speaker to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Instrument Panel Speaker, Passenger Side 15042464 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15042464 Instrument Panel Speaker, Passenger Side is available in the market under the name GM Car Speakers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15042464 Instrument Panel Speaker, Passenger Side fits certain Chevrolet Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15042464 maintains top performance when functioning as the Speaker, Radio Receiver unit at its Passenger Side. The component 15042464 is constructed from durable material and its dimensions span 4.0 x 4.1 x 2.1 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 15042464 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.