Make sure this part fits

GM 15054680
Rear Driver Speaker, Driver Side

2003-2007 GM

Customer Questions & Expert Answers (21)
GM 15054680 Rear Driver Speaker, Driver Side
GM 15054680 Rear Driver Speaker, Driver Side
  • Part Description
    Speaker, Radio Auxiliary Speakers
  • Position
    Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2007 Chevrolet Silverado 1500Base, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L GAS
    2003-2007 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2003-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 3500 ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15054680 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15054680 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you remove the subwoofer speaker for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the 4 retaining bolts from the speaker and disconnect the wire connector before taking the speaker out of the subwoofer assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the final step after installing the speaker for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the trim panel and then inspect the component's operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step in the installation process for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Connect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be done after securing the speaker mounting bracket for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Install the speaker onto the mounting bracket and reconnect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    How do you attach the speaker during installation for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Attach the speaker to the mounting bracket and reconnect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be done after removing the door trim panel for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Take out the screws that secure the speaker to the mounting bracket and disconnect the electrical connector from the speaker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What should you do after removing the trim panel for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Push down on the top retainer to detach the speaker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the process for installing the new speaker for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Place the speaker into the subwoofer assembly and connect the wire connector, ensuring to follow the Fastener Notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be done after securing the mounting bracket for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Attach the speaker to the mounting bracket and reconnect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the process for installation for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Connect the electrical connectors as needed, install the speaker, and then reinstall the garnish molding.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step to replace the front floor console subwoofer speaker for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Remove the 2 front seats and slightly move the center console rearward to disconnect the wire connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step in the installation process for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Press the speaker back in until it is fully seated.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step in the installation process for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Position the speaker mounting bracket and secure it with the bolts to the door, tightening them to 6 N.m (53 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be done after removing the windshield garnish molding for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Disconnect the electrical connector from the speaker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step in the installation process for the 2004 GMC Yukon? Posted by Customer
    A:
    Connect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What should be done at the end of the process for the 2006 GMC Yukon? Posted by Customer
    A:
    Finally, verify the component's operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step to replace the rear door speaker in an extended cab for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Remove the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step to replace the Radio Front Side Door Speaker for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Begin by removing the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step in the installation process for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Connect the electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    Q:
    What is the first step to replace the front door speaker for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    First, remove the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Car Speakers
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Rear Driver Speaker, Driver Side 15054680 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15054680 Rear Driver Speaker, Driver Side is available in the market under the name GM Car Speakers. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15054680 Rear Driver Speaker, Driver Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade and Hummer H2 models.
The original GM component designated by manufacturer part number 15054680 maintains top performance when functioning as the Speaker, Radio Auxiliary Speakers unit at its Driver Side. The component 15054680 is constructed from durable material and its dimensions span 4.1 x 12.4 x 11.6 inches while weighing 2.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Speaker. The part 15054680 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.