Make sure this part fits

GM 15120582
Striker

2001-2007 GM

Customer Questions & Expert Answers (10)
GM 15120582 Striker
GM 15120582 Striker
  • Part Description
    Striker, Door Lock Striker
  • Manufacturer
    General Motors
Make sure this part fits
$18.61 MSRP: $27.71
You Save: $9.10 (33%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2001-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2001-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2007 Chevrolet Silverado 2500 HDBase, LS, LT, LTZ, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 2500 HD ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2001-2006 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 3500 ClassicLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2007 Chevrolet Silverado 3500 HDLT, LTZ, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15120582 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15120582 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the lower rear door striker on Chevrolet Silverado 2500? Posted by Customer
    A:
    The installation process of the lower rear door striker starts by melting the side access door open followed by disassembly of the lower door striker bolts. The second step involves removing the lower door striker assembly that is inside the vehicle. Follow the Fastener Notice as stated in Service Precautions before repositioning the lower door striker on the vehicle then install the bolts. Finish this install procedure by tightening lower door striker bolts to 24 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front door striker on GMC Sierra 1500 Classic? Posted by Customer
    A:
    The first step for front door striker replacement involves disassembling both the lower striker bolt followed by loosening the upper bolt so the striker and spacer (when present) can be turned away from the lower hole. Tighten the lower striker bolt until it effectively keeps the striker backing plate stable. Start by taking out the upper striker bolt and proceed with the removal of the spacer when one is installed and then extract the striker itself. The installing process starts by attaching the striker along with its spacer (if present) before proceeding with the upper striker bolt. You need to rotate the lower striker bolt to achieve proper alignment of the upper threaded hole after verifying that the striker backing plate has shifted position. Before installation remove the lower bolt then turn the striker along with its optional spacer to position the lower threaded hole of the striker backing plate. The final step of installation includes tightening both striker bolts to levels of 24 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the installation process for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Install the lower door striker bolts and tighten them to 24 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done after removing the upper door striker bolts for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Take out the upper door striker from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done after installing the upper door striker for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Close the door and inspect it for proper operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step to replace the rear door striker on an Extended Cab for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Begin by removing the upper trim door upper striker cover by pulling straight downward to release it from the retainer clips.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step to replace the lower rear door striker for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Open the side access door and remove the lower door striker bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the next step after aligning the upper threaded hole for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Remove the lower bolt, then rotate the striker and the spacer, if equipped, to align the lower threaded hole in the striker backing plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    How do you install the new door lower striker for the 2007 GMC Sierra 1500? Posted by Customer
    A:
    First, position the door lower striker and reinstall the spacer if applicable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Striker 15120582 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15120582 Striker is available in the market under the name GM Door Striker. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15120582 Striker fits certain Chevrolet Silverado 1500, Silverado 2500 HD, Silverado 2500 models, as well as GMC Sierra 1500, Sierra 2500 HD, Sierra 2500 models.
The original GM component designated by manufacturer part number 15120582 maintains top performance when functioning as the Striker, Door Lock Striker unit. The component 15120582 is constructed from durable material and its dimensions span 3.4 x 2.6 x 1.6 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 15120582 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 15120582. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.