Make sure this part fits

GM 10294035
Run Weatherstrip, Front Passenger Side

1997-2008 GM

Customer Questions & Expert Answers (16)
GM 10294035 Run Weatherstrip, Front Passenger Side
  • Part Description
    Weatherstrip, Front Door Window; Window Channel
  • Position
    Front Passenger Side
  • Manufacturer
    General Motors
Make sure this part fits
$57.43 MSRP: $85.48
You Save: $28.05 (33%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1997-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    1999-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    1997-1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 10294035 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10294035 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the new sliding door window weatherstrip be installed for the 2006 Buick Terraza? Posted by Customer
    A:
    Install the new weatherstrip ensuring the joint is aligned at the center of the sliding door window latch attachment point, and roll the weatherstrip from the joint to the bottom of the window to ensure a proper seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How can proper adhesion of the weatherstrip be ensured for the 2007 Buick Terraza? Posted by Customer
    A:
    Hand roll the rear side door auxiliary weatherstrip to the body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do after disabling the power sliding door system for the 2006 Buick Terraza? Posted by Customer
    A:
    Open the sliding rear door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the body panel be prepared for the 2005 Buick Terraza? Posted by Customer
    A:
    Clean the body panel with oil-free naphtha or alcohol.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the rear quarter window weatherstrip be installed for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Install the forward joint of the rear quarter window weatherstrip to the vehicle, ensuring it is aligned 50 mm (1.96 in) from the front lower window opening radius.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What needs to be done to the quarter window pinch-weld flange for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Clean all adhesive from the quarter window pinch-weld flange.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the sliding door auxiliary weatherstrip for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Fully open the sliding rear door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should you do with the loose end of the weatherstrip for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Join the loose end of the weatherstrip to the seated end.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the front door weatherstrip for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Remove the front door opening sill plates.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after removing the rear quarter window for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Pull the rear quarter window weatherstrip from the pinch-weld flange and take it out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after heating the weatherstrip for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Carefully peel the weatherstrip from the panel surface with a flat-bladed tool, ensuring not to damage the paint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    How should the area of the hood outer seals be prepared for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Clean the old adhesive in the area using 3M(TM) P/N 8984 adhesive remover or an equivalent.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the first step to replace the liftgate weatherstrip for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Open the liftgate and remove the liftgate sill plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What should be done after pressing the weatherstrip to the body for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    Hand roll the rear side door auxiliary weatherstrip to the body to ensure proper adhesion.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    Q:
    What is the final step after installing the new weatherstrip for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Finally, close the front door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Weather Strip
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Run Weatherstrip, Front Passenger Side 10294035 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10294035 Run Weatherstrip, Front Passenger Side is available in the market under the name GM Weather Strip, Door Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10294035 Run Weatherstrip, Front Passenger Side fits certain Chevrolet Uplander, Venture models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana, Trans Sport and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 10294035 maintains top performance when functioning as the Weatherstrip, Front Door Window; Window Channel unit at its Front Passenger Side. The component 10294035 is constructed from durable material and its dimensions span 18.2 x 17.2 x 5.7 inches while weighing 2.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Weatherstrip, Side Door Window Glass. The part 10294035 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.