Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 12367281
Wiper Blade, Driver Side

1998-2009 GM

Customer Questions & Expert Answers (33)
GM 12367281 Wiper Blade, Driver Side
  • Part Description
    Wiper, Windshield Wiper
  • Position
    Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 12367281 Wiper Blade, Driver Side is Ref No. 2 in the diagram below

    2003 Chevy Impala Wiper Blade, Driver Side Diagram for 12367281
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 12367281

  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Cadillac CTSBase, Luxury, Luxury Sport, V6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    1998 Cadillac SevilleSLS, STS8 Cyl 4.6 L GAS
    2000-2005 Chevrolet ImpalaBase, LS, LS Sport, SS6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 12367281 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12367281 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step for installation of the new wiper blade for the 2003 Cadillac CTS? Posted by Customer
    A:
    Insert the hook of the wiper arm through the opening in the wiper blade.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    What should you do after installing the wiper blade for the 2005 Cadillac CTS? Posted by Customer
    A:
    Return the wiper blades to the park position and operate the wipers to check for proper function.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    What is the final step in the replacement process for the 2003 Cadillac CTS? Posted by Customer
    A:
    Finally, install the wiper blade onto the wiper arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    How do you remove the wiper blade for the 2007 Cadillac CTS? Posted by Customer
    A:
    Push in the button of the wiper blade clip and remove the wiper blade from the inside radius of the wiper arm, then bring the wiper arm out through the opening in the wiper blade.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    How do you remove the wiper blade for the 2004 Cadillac CTS? Posted by Customer
    A:
    Push in the button of the wiper blade clip and remove the wiper blade from the inside radius of the wiper arm, then bring the wiper arm out through the opening in the wiper blade.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    What should be done after securing the wiper arm for the 2003 Cadillac CTS? Posted by Customer
    A:
    Secure the upper hood assist rods, install the wiper arm nut covers, close the hood assembly, and operate the wipers to verify their operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How do you position the passenger side wiper arm during installation for the 2007 Cadillac CTS? Posted by Customer
    A:
    Position it so the wiper blade tip aligns with the orange dot.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How do you align the driver side wiper for the 2005 Cadillac CTS? Posted by Customer
    A:
    Align it with the orange line at the tip of the wiper blade located at the center lower windshield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should be done after securing the wiper arm for the 2004 Cadillac CTS? Posted by Customer
    A:
    Secure the upper hood assist rods onto the assist rod ball studs, install the wiper arm nut covers, close the hood assembly, and operate the wipers to verify operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How do you secure the wiper blade to the wiper arm for the 2004 Cadillac CTS? Posted by Customer
    A:
    Position the wiper blade pivot in the inside radius of the wiper arm hook and pull the wiper blade pivot into the wiper arm hook until it locks securely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    How should the passenger side wiper arm be positioned during installation for the 2003 Cadillac CTS? Posted by Customer
    A:
    Position it so the wiper blade tip aligns with the orange dot on the lower outer edge of the windshield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What additional step is needed when removing the driver side wiper arm for the 2006 Cadillac CTS? Posted by Customer
    A:
    Detach the upper hood assist rods from the assist rod ball studs, applying pressure only at the end of the liftgate/hood assist rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What additional step is needed when removing the driver side wiper arm for the 2004 Cadillac CTS? Posted by Customer
    A:
    Detach the upper hood assist rods from the assist rod ball studs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How do you insert the wiper blade element during installation for the 2004 Cadillac SRX? Posted by Customer
    A:
    Insert the open end of the wiper blade element into the bottom claws of the wiper blade, guide the wiper blade element through the wiper blade claw sets, and engage the bottom claw of the wiper blade into the notches in the wiper blade element.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    What should you do after inserting the wiper blade element for the 2006 Cadillac SRX? Posted by Customer
    A:
    Guide the wiper blade element through the wiper blade claw sets and engage the bottom claw of the wiper blade into the notches in the wiper blade element.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    How do you remove the wiper blade for the 2008 Cadillac SRX? Posted by Customer
    A:
    Push in the button of the wiper blade clip and remove the wiper blade from the inside radius of the wiper arm, then bring the wiper arm out through the opening in the wiper blade.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    What is the next step after removing the rear wiper arm for the 2007 Cadillac SRX? Posted by Customer
    A:
    Remove the rear wiper blade from the rear wiper arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How do you start replacing the wiper blade element on the passenger side for the 2005 Cadillac SRX? Posted by Customer
    A:
    First, remove the wiper blade from the wiper arm, ensuring to replace the wiper blade element if it has been detached.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    What caution should be taken during installation for the 2009 Cadillac SRX? Posted by Customer
    A:
    Caution should be taken regarding fasteners to avoid vehicle damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How do you secure the new wiper blade to the wiper arm for the 2009 Cadillac SRX? Posted by Customer
    A:
    Position the wiper blade pivot in the inside radius of the wiper arm hook, and pull the wiper blade pivot into the wiper arm hook until it locks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    How do you install the new rear wiper blade for the 2008 Cadillac SRX? Posted by Customer
    A:
    Place the rear wiper blade onto the rear wiper arm, then position the rear wiper arm onto the wiper motor, aligning the rear wiper blade with the mark on the rear window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should be removed before taking off the wiper arm for the 2007 Cadillac SRX? Posted by Customer
    A:
    Remove the covers from the wiper arm nuts and then remove the nuts from the wiper arm drive spindle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How do you install the new rear wiper blade for the 2004 Cadillac SRX? Posted by Customer
    A:
    Attach the rear wiper blade onto the rear wiper arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How do you remove the wiper blade for the 2007 Cadillac SRX? Posted by Customer
    A:
    Push in the button of the wiper blade clip and remove the wiper blade from the inside radius of the wiper arm, then bring the wiper arm out through the opening in the wiper blade.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    What is the final step after installation for the 2006 Cadillac SRX? Posted by Customer
    A:
    Remove the tape or mark from the rear window and inspect the rear wiper system for proper operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should you ensure during the installation of the wiper blade element for the 2008 Cadillac SRX? Posted by Customer
    A:
    Ensure the wiper blade claws remain in the rubber claw channel of the wiper blade element and do not contact the metal spline of the wiper blade element.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    How do you install the wiper blade onto the wiper arm for the 2005 Cadillac SRX? Posted by Customer
    A:
    Attach the wiper blade onto the wiper arm, position the passenger side wiper arm so the wiper blade tip aligns with the orange dot, and position the driver side wiper arm so the wiper blade tip aligns with the orange line.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should be done after removing the wiper blade for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Detach the bottom claws of the wiper blade from the notches in the wiper blade element and pull the wiper blade element out through the wiper blade claws.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Blade
    Q:
    What should be done after positioning the wiper arms for the 2001 Chevrolet Impala? Posted by Customer
    A:
    Install the wiper arm nut and tighten it to 30 N.m (22 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    How should the wiper arms be positioned during installation for the 2003 Chevrolet Impala? Posted by Customer
    A:
    The right arm should be 97-107 mm (3.82-4.21 in) from the end of the wiper arm to the air inlet screen, and the left arm should be 125-147 mm (4.92-5.78 in) from the wiper blade tip to the air inlet screen.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What do you do once the wiper arms pause for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Turn the ignition OFF.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should be done to the drive spindle knurls before installation for the 2009 Cadillac SRX? Posted by Customer
    A:
    Clean the drive spindle knurls with a fine wire brush.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Wiper Blade, Driver Side 12367281 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12367281 Wiper Blade, Driver Side is available in the market under the name GM Windshield Wiper, Wiper Arm, Wiper Blade. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12367281 Wiper Blade, Driver Side fits certain Chevrolet Impala models, as well as Cadillac CTS, SRX, Seville models.
The original GM component designated by manufacturer part number 12367281 maintains top performance when functioning as the Wiper, Windshield Wiper unit at its Driver Side. The component 12367281 is constructed from durable material and its dimensions span 24.0 x 1.7 x 1.0 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Insert; Wiper, Windshield Wiper Blade. The part 12367281 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.