OEM 2000 Buick LeSabre Power Steering Pump

2000 Buick LeSabre Power Steering Pump Parts Questions & Experts Answers

• Q: How to replace the power steering pump on 2000 Buick LeSabre?

  A: The required equipment for Power Steering Pump replacement consists of pulley remover (J25034-C) and pulley installer (J25033-C). First remove the pump Drive Belt followed by disconnecting the power steering gear pressure hose in addition to the return hose from the pump. First raise and support the vehicle after removing the three mounting bolts at their position. Then reach beneath the engine to remove the pump. The procedure after pump removal includes moving the pulley whenever necessary. Begin pulley installation by mounting it to the pump then add the three mounting bolts before securing them at 27 nm torque (20 ft. Lbs.). Install the power steering gear inlet hose on the pump with a torque of 30 nm (22 ft. Lbs.) followed by attaching the return hose. After lowering the vehicle install the Drive Belt while filling system components and bleeding out air from the system. The system requires a final examination to check for any leakages.