How to replace the front Ride Height Sensor for the electronic suspension on 2000 Cadillac DeVille?

The first step to replace the front position sensor for the electronic suspension involves raising the vehicle and taking off the wheel. The height sensor connector should be disconnected along with the sensor link from the ball stud followed by loosening the sensor mounting nut for sensor removal from the vehicle. You should start by putting the sensor mounting stud head into the key hole before you tighten the sensor mounting nut to 9 Nm (80 inch lbs.). Connect the sensor link onto the ball stud before you reconnect the height sensor connector. To finish the procedure install the wheel followed by lowering the vehicle.

OEM 2000 Cadillac DeVille Ride Height Sensor

Suspension Level Hight Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Ride Height Sensors found

View related parts
2000 Cadillac DeVille Position Sensor, Passenger Side Part Number: 25728488
$101.85 MSRP: $181.88
You Save: $80.03 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Ride Height Sensor; Rear Sensor; Sensor
- Position: Passenger Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 10.3 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25728488
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
View related parts
2000 Cadillac DeVille Position Sensor, Front Passenger Side Part Number: 25728487
Product Specifications
- Other Name: Sensor Assembly-Electronic Suspension Front Position; Ride Height Sensor; Front Sensor; Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Front Passenger Side
- Item Weight: 1.10 Pounds
- Item Dimensions: 15.0 x 5.7 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25728487
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
View related parts
2000 Cadillac DeVille Position Sensor, Driver Side Part Number: 25728486
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Ride Height Sensor; Front Sensor; Sensor
- Position: Driver Side
- Item Weight: 1.10 Pounds
- Item Dimensions: 15.5 x 5.6 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25728486
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
View related parts
2000 Cadillac DeVille Position Sensor, Driver Side Part Number: 25728489
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Ride Height Sensor; Rear Sensor; Height Sensor; Sensor
- Position: Driver Side
- Replaces: 22189837, 22176267
- Item Weight: 0.90 Pounds
- Item Dimensions: 8.2 x 6.5 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25728489
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS

2000 Cadillac DeVille Ride Height Sensor

With a comprehensive array of OEM 2000 Cadillac DeVille Ride Height Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Cadillac DeVille Ride Height Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Cadillac DeVille Ride Height Sensor Parts and Q&A

Q: How to replace the front Ride Height Sensor for the electronic suspension on 2000 Cadillac DeVille?
A: The first step to replace the front position sensor for the electronic suspension involves raising the vehicle and taking off the wheel. The height sensor connector should be disconnected along with the sensor link from the ball stud followed by loosening the sensor mounting nut for sensor removal from the vehicle. You should start by putting the sensor mounting stud head into the key hole before you tighten the sensor mounting nut to 9 Nm (80 inch lbs.). Connect the sensor link onto the ball stud before you reconnect the height sensor connector. To finish the procedure install the wheel followed by lowering the vehicle.