How to Service and Repair a Sway Bar Bushing with RPO FE1 or FE3 on 2000 Cadillac DeVille?

The service and repair of Sway Bar Bushing under rpo fe1 or fe3 requires vehicle lifting followed by supporting the frame to achieve free Control Arm movement. Remove first the wheels then remove the sway bar link bolts and brackets before taking off the sway bar insulator connected to the bracket. Follow fastener guidelines in order to perform stable installation of right and left sway bar insulators along with their brackets and bolts. The next step involves installing the sway bar link insulators and washers with nut and bolt that should be loosely tightened. Apply torque of 33 nm (24 ft. Lbs.) to sway bar to frame bolts while the sway bar link nut should be tightened to 17 nm (13 ft. Lbs.). The procedure ends by reinstalling wheels and tires along with wheel nut tightening to 125 nm (80 ft. Lbs.) before lowering the vehicle.

OEM 2000 Cadillac DeVille Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Sway Bar Bushings found

View related parts
2000 Cadillac DeVille Lower Control Arm Bushing Part Number: 6270752
$1.18 MSRP: $1.86
You Save: $0.68 (37%)
Product Specifications
- Other Name: Insulator-Stabilizer Shaft Link; Control Arm Bushing; Axle Pivot Bushing; Stabilizer Link Bushing; Strut Mount Bushing; Stabilizer Link Kit; Insulator; Shock Absorber/Strut; Steering Anti-Shock.
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.0 x 4.6 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6270752
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac DeVille Submodels:
- Base, Cabriolet, d'Elegance, DHS, DTS, Protection Series, Spring Edition, Touring | 6 Cyl 4.3 L DIESEL, 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
View related parts
2000 Cadillac DeVille Stabilizer Bar Bushing, Yellow, Rear Part Number: 20757299
Product Specifications
- Other Name: Insulator-Rear Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing; Stabilizer Bar Insulator; Bushing; Bushings; Insulator, Stabilizer Shaft
- Position: Rear
- Replaces: 25604385
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.4 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 20757299
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
View related parts
2000 Cadillac DeVille Stabilizer Bar Bushing Part Number: 25699776
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Stabilizer Bushing Kit; Sway Bar Bushing; Shaft Bushings; Bushing; Bushings
- Position: Front
- Replaces: 25689666, 25640440
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 3.8 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25699776
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac DeVille Submodels:
- Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS

2000 Cadillac DeVille Sway Bar Bushing

With a comprehensive array of OEM 2000 Cadillac DeVille Sway Bar Bushing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Cadillac DeVille Sway Bar Bushing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Cadillac DeVille Sway Bar Bushing Parts and Q&A

Q: How to Service and Repair a Sway Bar Bushing with RPO FE1 or FE3 on 2000 Cadillac DeVille?
A: The service and repair of Sway Bar Bushing under rpo fe1 or fe3 requires vehicle lifting followed by supporting the frame to achieve free Control Arm movement. Remove first the wheels then remove the sway bar link bolts and brackets before taking off the sway bar insulator connected to the bracket. Follow fastener guidelines in order to perform stable installation of right and left sway bar insulators along with their brackets and bolts. The next step involves installing the sway bar link insulators and washers with nut and bolt that should be loosely tightened. Apply torque of 33 nm (24 ft. Lbs.) to sway bar to frame bolts while the sway bar link nut should be tightened to 17 nm (13 ft. Lbs.). The procedure ends by reinstalling wheels and tires along with wheel nut tightening to 125 nm (80 ft. Lbs.) before lowering the vehicle.