OEM 2000 Cadillac Eldorado Door Latch Assembly

2000 Cadillac Eldorado Parts Questions & Experts Answers

• Q: How to replace the rear Door Latch Assembly on 2000 Cadillac Eldorado?

  A: The first step to replace a rear door latch involves taking out the door trim panel and water deflector before handling the window. First disconnect the retainer from outside handle and key cylinder rods followed by removing these rods from the lock mechanism. The door lock securement consists of three fasteners (1,2,3) that must be eliminated along with disconnecting the electrical connectors from the lock together with the Window Motor and module. Locate the door module by removing its fasteners as well as nuts and bolt. To install the lock module position it on the door before hanging it onto the studs while starting the nuts and bolt by hand. Use a sequence and pull the door module assembly rearward while securing the lock to the door through tight installation of the 3 fasteners (1,2,3) at 10 n.m (89 lb in). Begin by securing the lock assembly and proceed to tighten the nuts to 6 n.m (53 lb in) while fastening the bolt to 6 n.m (53 lb in) following a proper sequence. The system needs electrical connector connection before placing the outside handle together with the lock rods. Install the window and water deflector and trim panel in their proper locations.