Other Name: Sealing Strip Assembly-Front Side Door Bottom Auxiliary; Weatherstrip; Door Seal; Sealing Strip, Door Weatherstrip
Position: Front Bottom
Item Weight: 1.50 Pounds
Item Dimensions: 48.4 x 1.4 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 3535767
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2000 Cadillac Eldorado Submodels:
Base, ESC, ETC, Sport, Touring | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
2000 Cadillac Eldorado Weather Strip
With a comprehensive array of OEM 2000 Cadillac Eldorado Weather Strip, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Cadillac Eldorado Weather Strip are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2000 Cadillac Eldorado Parts Questions & Experts Answers
Q: How to replace the door opening Weather Strip on 2000 Cadillac Eldorado?
A: The first step to install a new door opening weather strip is to detach both doors while removing the carpet retainers. You will then pull the weather strip from its retainer. Prior to installing the pinch-weld flange should receive a soap/water solution however the B-pillar area must stay clear. The weather strip paint dot identifies right-hand use with blue coloration and left-hand use with pink at the windshield pillar base. Start by locating the backward corner at the door opening top and the curved section between roof rail and A-pillar and the bottom portion of weather strip which reaches towards the lower A-pillar. Place the blue or pink strip paint dot on the quarter panel sheet metal trim before tracing towards the hinge pillar from the B-pillar. Begin installation from the base of the windshield pillar before moving upward to the upper rear corner then proceed from the B-pillar crown to the downward and forward installation path back to the windshield pillar. Apply firm pressure to the weather strip while placing it over the pinch weld flange to make it stick properly by ensuring it reaches all corner areas and thick flange sections. Inspect the weather strip fit to the door opening while you replace the carpet retainer before finishing your work on the doors.