Other Name: Sealing Strip Assembly-Front Side Door Bottom Auxiliary; Weatherstrip; Door Seal; Sealing Strip, Door Weatherstrip
Position: Front Bottom
Item Weight: 1.50 Pounds
Item Dimensions: 48.4 x 1.4 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 3535767
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2001 Cadillac Eldorado Submodels:
Base, ESC, ETC, Sport, Touring | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
2001 Cadillac Eldorado Weather Strip
With a comprehensive array of OEM 2001 Cadillac Eldorado Weather Strip, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Cadillac Eldorado Weather Strip are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2001 Cadillac Eldorado Parts Questions & Experts Answers
Q: How to replace the front door Weather Strip on 2001 Cadillac Eldorado?
A: The first step to replace front door weather strip begins with door opening followed by carpet retainer removal. You must remove the retainer by extracting the weather-strip. When installing the pinchweld flange requires a soap/water solution yet users must avoid applying it near the B-pillar area. Check the weather-strip paint dot that indicates the right-hand side through its blue color or the left-hand side through its pink color found at the base of the windshield pillar. Check the location of the upper rear door opening mitered corner as well as the upper weather strip section between the roof rail and A-pillar and the forward approach of the lower A-pillar weather strip. Align the blue or pink paint dot on the sheet metal trim line of the quarter panel before looping it down from the B-pillar to the hinge pillar. The weather strip installation should begin at the windshield pillar base before moving toward the upper rear corner and then from the B-pillar upper corner downwards through its forward motion back to the windshield pillar base. Use steady pressure to attach the weather-strip to the pinch weld flange so it closes in all corners and heavy flange parts. The fit of the weather strip against the door opening should be checked before reattaching the carpet retainer and closing both doors.