Other Name: Weatherstrip Assembly-Front Side Door Roof Drip; Weatherstrip, Side Roof Rail; Weatherstrip
Position: Front Passenger Side
Replaces: 25636389
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1992-2002 Cadillac Eldorado | Base, ESC, ETC, Sport, Touring | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
| Page 1 of 2 |Next >
1-20 of 36 Results
Cadillac Eldorado Weather Strip
Our website offers an extensive catalog of genuine Cadillac Eldorado Weather Strip at unbeatable prices. Every OEM Cadillac Eldorado Weather Strip comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Cadillac Eldorado Weather Strip Parts Questions & Experts Answers
Q: How to replace the front door Weather Strip on Cadillac Eldorado?
A: Start by opening the car door and then taking out the carpet retainer before proceeding to replace the front door weather strip. Take the weather strip out from its retainer positioning. Soak the pinch-weld flange with a soap/water solution covering all spots except the B-pillar region when you install the weather strip. Check the paint dot on the weather strip located at the windshield pillar base because it identifies right-hand side (blue) from left-hand side (pink). You should identify the upper-rear mitered corner of the door opening and the weather strip portion between this corner and the roof rail and A-pillar as well as the piece that extends from the front of the weather strip to the lower A-pillar. The sheet metal trim line of the quarter panel should be positioned using pink or blue paint dots. Start by looping the weather strip between the B-pillar and the hinge pillar while pointing it forward. Begin at the windshield pillar base and work both up to the upper rear corner before moving down from the B-pillar corner to the windshield pillar base. Use firm pressure to attach the weather strip onto the pinch weld flange while making sure it fully sinks into place at the corners and thick pinch weld areas. The final step involves checking weather strip fit in the door opening before installing the carpet retainer followed by door closure.