OEM 2000 Cadillac Eldorado Hood Cable

Hood Release Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hood Cable found

  • 2000 Cadillac Eldorado Hood Cable - 25678362
    2000 Cadillac Eldorado Hood Cable Diagram - 25678362
    View related parts
    Product Specifications
    • Other Name: Cable, Hood Latch; Hood Release Cable
    • Replaces: 25672124, 25654570
    • Item Weight: 1.50 Pounds
    • Item Dimensions: 3.7 x 11.4 x 10.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 25678362
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2000 Cadillac Eldorado Submodels:
    • Base, ESC, ETC, Sport, Touring | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS

2000 Cadillac Eldorado Hood Cable

With a comprehensive array of OEM 2000 Cadillac Eldorado Hood Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Cadillac Eldorado Hood Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Cadillac Eldorado Hood Cable Parts Questions & Experts Answers

  • Q: How to replace the Hood Cable for the Primary Latch Release on 2000 Cadillac Eldorado?
    A: Starting the hood primary latch Hood Cable replacement requires removal of the radiator support sight shield followed by air cleaner assembly disassembly and separation of engine compartment fuse and relay center cover. A string needs to be used for secure guidance during cable installation so it should be tied around the cable before actual removal. The Hood Cable must be separated from the primary latch before removing clips to guide it down the body rail toward the vehicle's rear end. First remove the left sound insulator and hood release latch fasteners before pushing the cable and grommet into the passenger compartment. Draw the string off the old cable assembly while extracting the vehicle's Hood Cable and release latch. Install the new cable assembly by stringing the cable to it then carefully routing it to the vehicle's front while placing the assembly into the cowl. To install the grommet to the cowl panel you must turn it to the right for better fitting, then attach the Hood Cable to the primary latch and position the Hood Cable latch to the lower instrument panel. Secure the fasteners to the latch release handle then torque each assembly to 6 n.m (53 lb in). Structured assembly goes as follows: left sound insulator, then the engine compartment fuse and relay center cover and after that the air cleaner assembly and finally the radiator support sight shield.

Related 2000 Cadillac Eldorado Parts