How to replace the right automatic Motor and Transmission Mount on 2000 Cadillac Eldorado?

Vehicle elevation along with wheel removal begins the right automatic transmission mount replacement process starting with removal of the right front wheel. Position a suitable supporting jack under the engine assembly and remove the engine frame transmission mount nuts then disassemble the mount bracket attachment nuts. The slight lift of the jack should raise the engine/Transmission Assembly to remove the mount. When installing the mount first position it onto the mount bracket while following the service precautions for fasteners and then secure the attaching nuts. Tighten two installing nuts holding the mount in position to the bracket at 50 nm torque level (36 ft. Lbs.). After dropping the engine/Transmission Assembly into place, secure it to the frame using two transmitting nuts, torqued to a maximum of 50 nm (36 ft. Lbs.). Complete the installation by removing the engine support jack then installing the right front wheel before lowering the vehicle.

OEM 2000 Cadillac Eldorado Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Motor And Transmission Mounts found

View related parts
2000 Cadillac Eldorado Motor Mount
Part Number: 22188025
$129.10 MSRP: $201.29
You Save: $72.19 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Engine Mount; Engine Bracket; Mount; Mount, Engine Mounting
- Replaces: 22175220, 22171688, 22113421, 22173302
- Item Weight: 7.80 Pounds
- Item Dimensions: 16.9 x 11.2 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22188025
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac Eldorado Submodels:
- Base, ESC, ETC, Sport, Touring | 8 Cyl 4.6 L GAS
View related parts
2000 Cadillac Eldorado Transmission Mount, Rear Passenger Side
Part Number: 22188104
Product Specifications
- Other Name: Mount Assembly-Transmission Rear; Transfer Case Mount; Mount, Transmission Mounting
- Position: Rear Passenger Side
- Replaces: 22173301, 22188019, 22171682
- Item Weight: 6.50 Pounds
- Item Dimensions: 9.1 x 6.3 x 16.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22188104
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac Eldorado Submodels:
- Base, ESC, ETC, Sport, Touring | 8 Cyl 4.6 L GAS
View related parts
2000 Cadillac Eldorado Transmission Mount, Driver Side
Part Number: 22178759
Product Specifications
- Other Name: Mount, Transmission Mounting; Transfer Case Mount
- Position: Driver Side
- Item Weight: 3.00 Pounds
- Item Dimensions: 7.7 x 7.2 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22178759
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac Eldorado Submodels:
- Base, ESC, ETC | 8 Cyl 4.6 L GAS
View related parts
2000 Cadillac Eldorado Engine Support, Driver Side
Part Number: 3545224
Product Specifications
- Other Name: Bracket Assembly-Engine Mount; Engine Mount Bracket; Motor Mount; Mount Bracket; Engine Bracket; Front Support; Corner Support; Mount Support; Bracket, Engine Mounting
- Position: Driver Side
- Item Weight: 1.90 Pounds
- Item Dimensions: 7.9 x 5.3 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3545224
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac Eldorado Submodels:
- Base, Biarritz, ESC, ETC, Sport, Spring Edition, Touring | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
View related parts
2000 Cadillac Eldorado Engine Support, Passenger Side
Part Number: 3545223
Product Specifications
- Other Name: Bracket Assembly-Engine Mount; Engine Mount Bracket; Motor Mount; Mount Bracket; Engine Bracket; Front Support; Corner Support; Mount Support; Bracket, Engine Mounting
- Position: Passenger Side
- Item Weight: 3.30 Pounds
- Item Dimensions: 10.7 x 9.7 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3545223
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac Eldorado Submodels:
- Base, Biarritz, ESC, ETC, Sport, Spring Edition, Touring | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
View related parts
2000 Cadillac Eldorado Engine Support, Passenger Side
Part Number: 20708666
Product Specifications
- Other Name: Support-Motor; Engine Mount Bracket; Mount Bracket; Front Extension; Front Support; Mount Support; Support; Support, Engine Mounting
- Position: Passenger Side
- Item Weight: 1.70 Pounds
- Item Dimensions: 10.6 x 10.3 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20708666
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Cadillac Eldorado Submodels:
- Base, Biarritz, ESC, ETC, Sport, Spring Edition, Touring | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS

2000 Cadillac Eldorado Motor And Transmission Mount

With a comprehensive array of OEM 2000 Cadillac Eldorado Motor And Transmission Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Cadillac Eldorado Motor And Transmission Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Cadillac Eldorado Parts Questions & Experts Answers

Q: How to replace the right automatic Motor and Transmission Mount on 2000 Cadillac Eldorado?
A: Vehicle elevation along with wheel removal begins the right automatic transmission mount replacement process starting with removal of the right front wheel. Position a suitable supporting jack under the engine assembly and remove the engine frame transmission mount nuts then disassemble the mount bracket attachment nuts. The slight lift of the jack should raise the engine/Transmission Assembly to remove the mount. When installing the mount first position it onto the mount bracket while following the service precautions for fasteners and then secure the attaching nuts. Tighten two installing nuts holding the mount in position to the bracket at 50 nm torque level (36 ft. Lbs.). After dropping the engine/Transmission Assembly into place, secure it to the frame using two transmitting nuts, torqued to a maximum of 50 nm (36 ft. Lbs.). Complete the installation by removing the engine support jack then installing the right front wheel before lowering the vehicle.