How to Replace a Power Steering Hose on 2000 Chevrolet Impala?

Following safety protocols of placing a drain pan underneath start by removing clamps from the power steering return line to Power Steering Pump before taking off the rubber section of hose that links the return line with the pump. Afterward disconnect the rubber section of the power steering return line which exists on your vehicle. After vehicle support lift the vehicle, remove clamps and rubber hose pieces from the power steering return line and the power steering cooler pipe. To install the power steering return line system position the rubber section inside the vehicle before connecting the hose between the return line and the cooler pipe with clamps for protection. After lowering the vehicle position the return line rubber section before installing its hose connection to the Power Steering Pump and securing it with clamps. Follow up by draining the pan and filling the power steering system then bleeding the system before performing leak inspections.

OEM 2000 Chevrolet Impala Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Power Steering Hoses found

View related parts
2000 Chevrolet Impala Power Steering Cooler Tube
Part Number: 10306242
$83.72 MSRP: $131.14
You Save: $47.42 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Steering Fluid Cooler
- Item Weight: 5.30 Pounds
- Item Dimensions: 35.4 x 20.1 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10306242
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Impala Power Steering Return Hose
Part Number: 26075225
Product Specifications
- Other Name: Hose, Steering Gear Oil Return; Power Steering Hose; Return Hose; Return Tube; Upper Return Hose; Pipe, Steering Gear Oil Return
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.8 x 21.8 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26075225
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- Base, LS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Impala Power Steering Pressure Hose
Part Number: 21993842
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Replaces: 26083979, 26070141
- Item Weight: 1.80 Pounds
- Item Dimensions: 4.1 x 20.0 x 19.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 21993842
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- Base | 6 Cyl 3.4 L GAS
View related parts
2000 Chevrolet Impala Pipe Kit, Passenger Side
Part Number: 26055484
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Fluid Pipe; Line Kit; Tube; Pipe
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.8 x 2.7 x 18.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26055484
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2000 Chevrolet Impala Power Steering Pressure Hose
Part Number: 26064185
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Steering Gear Oil Pressure
- Item Weight: 1.80 Pounds
- Item Dimensions: 44.6 x 9.7 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26064185
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- Base, LS, LS Sport, Police, SS | 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Impala Pipe Kit, Driver Side
Part Number: 26065126
Product Specifications
- Other Name: Pipe Kit, Steering Gear Oil Pressure; Power Steering Hose; Fluid Pipe; Line Kit; Tube; Pipe
- Position: Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.0 x 10.2 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26065126
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2000 Chevrolet Impala Power Steering Hose

With a comprehensive array of OEM 2000 Chevrolet Impala Power Steering Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Impala Power Steering Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Impala Power Steering Hose Parts Questions & Experts Answers

Q: How to Replace a Power Steering Hose on 2000 Chevrolet Impala?
A: Following safety protocols of placing a drain pan underneath start by removing clamps from the power steering return line to Power Steering Pump before taking off the rubber section of hose that links the return line with the pump. Afterward disconnect the rubber section of the power steering return line which exists on your vehicle. After vehicle support lift the vehicle, remove clamps and rubber hose pieces from the power steering return line and the power steering cooler pipe. To install the power steering return line system position the rubber section inside the vehicle before connecting the hose between the return line and the cooler pipe with clamps for protection. After lowering the vehicle position the return line rubber section before installing its hose connection to the Power Steering Pump and securing it with clamps. Follow up by draining the pan and filling the power steering system then bleeding the system before performing leak inspections.