How to replace the wiper arm on 2000 Chevrolet Impala?

Initiating Wiper Arm replacement requires specific tools including Wiper Arm puller (J 39822). Wiper Arm puller (J 39822). Start by putting the ignition switch to accy then move the wiper switch to pulse. The ignition should be switched off with wiper arms at their lowest point during non-motion. Begin by disconnecting the washer hose from the washer nozzle and removing the cover from the nut followed by removing the nut and Wiper Arm and wiper transmission drive shaft. If a Wiper Arm proves difficult to uninstall by manual rocking action then employ the j 39822 Wiper Arm puller to extract it. Lift the Wiper Arm away from the Wiper Arm and then take the Wiper Blade out of position. Start by applying the Wiper Blade to the Wiper Arm before assembly. Install the Wiper Arm onto the wiper transmission drive shaft when both the ignition switch points to accy and the wiper switch shows pulse. Disable engine power while the wiper drive system reaches its wipe cycle's lowest point. When installing the wiper equipment position the Wiper Arm end point at least 97-107 mm (3.82-4.21 in) from the right-hand side air inlet screen but place the Wiper Blade tip minimum 125-147 mm (4.92-5.78 in) from the left-hand side air inlet grille panel. Fasten the wiper transmission drive shaft nut to both components until you reach 27 n.m (20 lb ft) torque. The Wiper Arm requires a pin removal before you attach the nut cover and apply windshield washer solvent to the hose for better installation followed by the hose connection to the washer nozzle. Perform a wiper test operation to verify functional performance.

OEM 2000 Chevrolet Impala Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Wiper Arms found

View related parts
2000 Chevrolet Impala Wiper Arm, Driver Side Part Number: 15237916
$57.38 MSRP: $89.89
You Save: $32.51 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Windshield Wiper Arm; Wiper Arm Assembly
- Position: Driver Side
- Replaces: 10424403, 10413089, 10296181, 10300574
- Item Weight: 1.20 Pounds
- Item Dimensions: 25.6 x 1.8 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15237916
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Impala Crank Arm Part Number: 12494832
$78.39 MSRP: $139.98
You Save: $61.59 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Windshield Wiper Motor Crank; Arm, Windshield Wiper Motor Drive
- Replaces: 12367235, 12367241, 22144098
- Item Weight: 1.30 Pounds
- Item Dimensions: 8.1 x 4.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12494832
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Impala Insert, Passenger Side Part Number: 12367280
$2.21 MSRP: $7.50
You Save: $5.29 (71%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Wiper, Windshield Wiper Blade
- Position: Passenger Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 23.2 x 1.8 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12367280
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Impala Wiper Blade Refill Part Number: 22143943
Product Specifications
- Other Name: Wiper, Windshield Wiper Blade; Windshield Wiper Blade Refills; Wiper Blade Insert; Wiper Insert; Blade Insert; Blade Assembly Insert; Insert; Wiper, Windshield Wiper; Wiper Blade
- Item Weight: 0.60 Pounds
- Item Dimensions: 25.1 x 3.5 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22143943
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Impala Wiper Arm, Passenger Side Part Number: 15237915
$53.77 MSRP: $96.02
You Save: $42.25 (44%)
Product Specifications
- Other Name: Arm, Windshield Wiper Arm; Wiper Arm Assembly
- Position: Passenger Side
- Replaces: 10296180, 10299632, 10300573, 10413088, 10435214, 10418682, 10424402, 10418542, 10424401, 22155308
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.7 x 26.7 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15237915
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Impala Wiper Blade, Driver Side Part Number: 12367281
Product Specifications
- Other Name: Wiper, Windshield Wiper; Insert; Wiper, Windshield Wiper Blade
- Position: Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 24.0 x 1.7 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12367281
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2000 Chevrolet Impala Wiper Arm

With a comprehensive array of OEM 2000 Chevrolet Impala Wiper Arm, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Impala Wiper Arm are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Impala Wiper Arm Parts and Q&A

Q: How to replace the wiper arm on 2000 Chevrolet Impala?
A: Initiating Wiper Arm replacement requires specific tools including Wiper Arm puller (J 39822). Wiper Arm puller (J 39822). Start by putting the ignition switch to accy then move the wiper switch to pulse. The ignition should be switched off with wiper arms at their lowest point during non-motion. Begin by disconnecting the washer hose from the washer nozzle and removing the cover from the nut followed by removing the nut and Wiper Arm and wiper transmission drive shaft. If a Wiper Arm proves difficult to uninstall by manual rocking action then employ the j 39822 Wiper Arm puller to extract it. Lift the Wiper Arm away from the Wiper Arm and then take the Wiper Blade out of position. Start by applying the Wiper Blade to the Wiper Arm before assembly. Install the Wiper Arm onto the wiper transmission drive shaft when both the ignition switch points to accy and the wiper switch shows pulse. Disable engine power while the wiper drive system reaches its wipe cycle's lowest point. When installing the wiper equipment position the Wiper Arm end point at least 97-107 mm (3.82-4.21 in) from the right-hand side air inlet screen but place the Wiper Blade tip minimum 125-147 mm (4.92-5.78 in) from the left-hand side air inlet grille panel. Fasten the wiper transmission drive shaft nut to both components until you reach 27 n.m (20 lb ft) torque. The Wiper Arm requires a pin removal before you attach the nut cover and apply windshield washer solvent to the hose for better installation followed by the hose connection to the washer nozzle. Perform a wiper test operation to verify functional performance.