How to Replace the Brake Disc on 2000 Chevrolet Malibu?

Get the vehicle into an elevated position because you must replace the Brake Disc. Proceed by taking out the tire and wheel combination then the caliper bracket later. After this step, pull off the Brake Disc and remove all dirt stuck on the metal parts between it and the hub bearing flange. Start by installing the updated Brake Disc and place the caliper bracket back in place. Return the tire and wheel components to their original position then lower the vehicle.

OEM 2000 Chevrolet Malibu Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Disc found

View related parts
2000 Chevrolet Malibu Rotor, Front
Part Number: 19213925
Product Specifications
- Other Name: Rotor Assembly, Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 18021774, 18060319, 18060692, 18040307, 19152703, 18048801, 18060442, 18060241
- Item Weight: 14.10 Pounds
- Item Dimensions: 3.2 x 12.2 x 12.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19213925
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Malibu Submodels:
- Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS

2000 Chevrolet Malibu Brake Disc

With a comprehensive array of OEM 2000 Chevrolet Malibu Brake Disc, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Malibu Brake Disc are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Malibu Parts Questions & Experts Answers

Q: How to Replace the Brake Disc on 2000 Chevrolet Malibu?
A: Get the vehicle into an elevated position because you must replace the Brake Disc. Proceed by taking out the tire and wheel combination then the caliper bracket later. After this step, pull off the Brake Disc and remove all dirt stuck on the metal parts between it and the hub bearing flange. Start by installing the updated Brake Disc and place the caliper bracket back in place. Return the tire and wheel components to their original position then lower the vehicle.