How to replace the wheel cylinder on 2000 Chevrolet Malibu?

Before the wheel cylinder replacement you need to lift the vehicle and position support stands under it. Take out the wheel cylinder after removing the wheel bolts. Use a cleaning method to remove the worn sealant from the wheel cylinder installation surface of the backing plate. Put Loctite(R) GM P/N 12345382 sealant onto the wheel cylinder contact area on the backing plate and put the wheel cylinder into position. Affix the wheel cylinder mounting bolts securely to 20 Nm (15 ft. lbs.) torque specification. Settle the bleeder valve and fasten it to 7 Nm (62 inch lbs.). Set the backing plate first then put on the tire and wheel assembly. End the process with wheel cylinder bleeding then put the vehicle down.

OEM 2000 Chevrolet Malibu Wheel Cylinder

Brake Wheel Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Cylinder found

View related parts
2000 Chevrolet Malibu Wheel Cylinder, Rear
Part Number: 18029868
Product Specifications
- Other Name: Cylinder Assembly, Rear Brake; Wheel Cylinder Repair Kit; Cylinder, Wheel Brake Cylinder/Caliper
- Position: Rear
- Item Weight: 1.50 Pounds
- Item Dimensions: 3.6 x 4.5 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 18029868
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Malibu Submodels:
- Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS

2000 Chevrolet Malibu Wheel Cylinder

With a comprehensive array of OEM 2000 Chevrolet Malibu Wheel Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Malibu Wheel Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Malibu Parts Questions & Experts Answers

Q: How to replace the wheel cylinder on 2000 Chevrolet Malibu?
A: Before the wheel cylinder replacement you need to lift the vehicle and position support stands under it. Take out the wheel cylinder after removing the wheel bolts. Use a cleaning method to remove the worn sealant from the wheel cylinder installation surface of the backing plate. Put Loctite(R) GM P/N 12345382 sealant onto the wheel cylinder contact area on the backing plate and put the wheel cylinder into position. Affix the wheel cylinder mounting bolts securely to 20 Nm (15 ft. lbs.) torque specification. Settle the bleeder valve and fasten it to 7 Nm (62 inch lbs.). Set the backing plate first then put on the tire and wheel assembly. End the process with wheel cylinder bleeding then put the vehicle down.