How to replace the A/C Hose Assembly on 2000 Chevrolet Monte Carlo?

The replacement process for compressor hose assembly starts by disconnecting the negative Battery Cable before removing the air cleaner along with duct assembly and then the cross vehicle brace. Before continuation remove the refrigerant then disconnect the compressor hose nut from both the condenser and accumulator before placing the compressor hose to a safe place. After vehicle elevation and support, eliminate the lower air deflector. Start by removing the compressor hose assembly nut from the compressor then unfasten the compressor hose from the compressor rear while getting rid of used o-rings and sealing washers. Before assembly apply mineral base refrigerant oil of 525 viscosity onto the new o-ring seals before installing them along with sealing washers to the compressor hose assembly. Secure the compressor hose assembly onto the compressor's rear location before fastening the hose assembly nut to 33 n.m (24 lb ft). Move on to connect the compressor hose with the accumulator and lock the nut to 16 n.m (12 lb ft). Lower the vehicle then attach the compressor hose to the condenser and torque the nut to 16 n.m (12 lb ft). After reinstallation of the lower air deflector continue by evacuating and recharging the a/c system. The process ends with connection of the negative Battery Cable while starting by putting back the cross vehicle brace and air cleaner and duct assembly.

OEM 2000 Chevrolet Monte Carlo A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 A/C Hoses found

View related parts
2000 Chevrolet Monte Carlo A/C Hose
Part Number: 10308247
$51.16 MSRP: $105.14
You Save: $53.98 (52%)
ADD TO CART
Product Specifications
- Other Name: Evaporator Outlet Hose; A/C Refrigerant Liquid Hose; A/C Line; Accumulator Tube; Hose; Hose, A/C Refrigerant (Metal And Rubber Sections)
- Item Weight: 1.20 Pounds
- Item Dimensions: 22.3 x 11.7 x 19.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10308247
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Monte Carlo A/C Hose
Part Number: 10422443
Product Specifications
- Other Name: Hose, Air Conditioner Compressor; A/C Refrigerant Liquid Hose; Compressor Hose; Discharge Hose; Hose & Tube Assembly; Hose, A/C Compressor
- Item Weight: 2.80 Pounds
- Item Dimensions: 25.9 x 20.9 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10422443
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport | 6 Cyl 3.4 L GAS
View related parts
2000 Chevrolet Monte Carlo A/C Line
Part Number: 10339261
Product Specifications
- Other Name: Tube Assembly-A/C Evaporator; A/C Refrigerant Liquid Hose; A/C Hose; A/C Tube; Evaporator Tube; Tube, A/C Refrigerant (All Metal)
- Replaces: 10433079, 10295391, 10445946
- Item Weight: 1.10 Pounds
- Item Dimensions: 36.4 x 17.2 x 15.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10339261
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Monte Carlo Submodels:
- LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Monte Carlo A/C Hose
Part Number: 19169348
Product Specifications
- Other Name: Hose, Air Conditioner Compressor; A/C Refrigerant Liquid Hose; Compressor Hose; Discharge Hose; Hose & Tube Assembly; Hose, A/C Compressor
- Replaces: 10348122, 10422442
- Item Weight: 1.90 Pounds
- Item Dimensions: 31.6 x 4.7 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19169348
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Monte Carlo Submodels:
- SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.8 L GAS
View related parts
2000 Chevrolet Monte Carlo Vent Tube
Part Number: 52481471
Product Specifications
- Other Name: Tube, Air Conditioner Blower Motor Cooling; Hose; Tube, A/C Blower Motor Cooling; Tube, Heater Motor Cooling
- Replaces: 03035684, 52489680, 3035684
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.1 x 2.1 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52481471
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Monte Carlo Submodels:
- LS, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2000 Chevrolet Monte Carlo A/C Hose

With a comprehensive array of OEM 2000 Chevrolet Monte Carlo A/C Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Monte Carlo A/C Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Monte Carlo Parts Questions & Experts Answers

Q: How to replace the A/C Hose Assembly on 2000 Chevrolet Monte Carlo?
A: The replacement process for compressor hose assembly starts by disconnecting the negative Battery Cable before removing the air cleaner along with duct assembly and then the cross vehicle brace. Before continuation remove the refrigerant then disconnect the compressor hose nut from both the condenser and accumulator before placing the compressor hose to a safe place. After vehicle elevation and support, eliminate the lower air deflector. Start by removing the compressor hose assembly nut from the compressor then unfasten the compressor hose from the compressor rear while getting rid of used o-rings and sealing washers. Before assembly apply mineral base refrigerant oil of 525 viscosity onto the new o-ring seals before installing them along with sealing washers to the compressor hose assembly. Secure the compressor hose assembly onto the compressor's rear location before fastening the hose assembly nut to 33 n.m (24 lb ft). Move on to connect the compressor hose with the accumulator and lock the nut to 16 n.m (12 lb ft). Lower the vehicle then attach the compressor hose to the condenser and torque the nut to 16 n.m (12 lb ft). After reinstallation of the lower air deflector continue by evacuating and recharging the a/c system. The process ends with connection of the negative Battery Cable while starting by putting back the cross vehicle brace and air cleaner and duct assembly.