How to Service the Crankshaft Position Sensor on 2000 Chevrolet Prizm?

A proper elevation and support system must be implemented prior to servicing the Crankshaft Position Sensor. Separate the stone shield from the sensor while you detach its electrical connector. Start by taking out the one hold down bolt which lets you remove the CKP sensor from the front cover of the engine block. The installation starts when you place the CKP sensor into the front cover of the engine block but must follow Fastener Notice instructions to avoid confusion. Apply 9 N.m (80lb in) torque to the CKP sensor hold down bolt during installation. Attach the stone shield then lower the vehicle before reconnecting the CKP sensor electrical connector.

OEM 2000 Chevrolet Prizm Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2000 Chevrolet Prizm Crankshaft Position Sensor
Part Number: 94859444
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Crankshaft Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.2 x 4.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 94859444
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Prizm Submodels:
- Base, LSi | 4 Cyl 1.8 L GAS

2000 Chevrolet Prizm Crankshaft Position Sensor

With a comprehensive array of OEM 2000 Chevrolet Prizm Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Prizm Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Prizm Parts Questions & Experts Answers

Q: How to Service the Crankshaft Position Sensor on 2000 Chevrolet Prizm?
A: A proper elevation and support system must be implemented prior to servicing the Crankshaft Position Sensor. Separate the stone shield from the sensor while you detach its electrical connector. Start by taking out the one hold down bolt which lets you remove the CKP sensor from the front cover of the engine block. The installation starts when you place the CKP sensor into the front cover of the engine block but must follow Fastener Notice instructions to avoid confusion. Apply 9 N.m (80lb in) torque to the CKP sensor hold down bolt during installation. Attach the stone shield then lower the vehicle before reconnecting the CKP sensor electrical connector.

Related 2000 Chevrolet Prizm Parts

Alternate Year Models

1999 Chevrolet Prizm Crankshaft Position Sensor 2001 Chevrolet Prizm Crankshaft Position Sensor