How to Replace a Motor and Transmission Mount on 2000 Chevrolet Prizm?

Raising the vehicle by using the engine support fixture; then install the hand of the front transaxle mount. Then remove the right hand and left hand splash shields, and remove the two bolts from the front transaxle. To follow that, take away the insulator to the mount bracket and the two front transaxle bracket bolts and the bracket from the transaxle. For installation, start with the front transaxle bracket and bolts installation, tighten them to 60 nm (44 ft. Lbs). Finally, the insulator should be installed to the mount bracket and the front transaxle mount through bolt (tigthened up to 60 Nm (44 ft. Lbs.). Mount the 2 bolts at the front transaxle mount and make sure they are tightened at 60 nm (44 ft. Lbs.) as well. Lastly, replace splah shields, left hand, and right hand with lowering the vehicle and removing engine support fixture.

OEM 2000 Chevrolet Prizm Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Motor And Transmission Mounts found

View related parts
2000 Chevrolet Prizm Side Mount Part Number: 94856853
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Engine Mount; Motor Mount; Mount, Engine Mounting
- Item Weight: 5.70 Pounds
- Item Dimensions: 9.5 x 6.4 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 94856853
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Prizm Submodels:
- Base, LSi | 4 Cyl 1.8 L GAS
View related parts
2000 Chevrolet Prizm Transmission Mount Part Number: 94856857
Product Specifications
- Other Name: Trans Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Side Mount; Mount, Transmission Mounting
- Item Weight: 2.60 Pounds
- Item Dimensions: 8.4 x 4.8 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 94856857
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Prizm Submodels:
- Base, LSi | 4 Cyl 1.8 L GAS
View related parts
2000 Chevrolet Prizm Transmission Mount Part Number: 94856858
Product Specifications
- Other Name: Trans Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Side Mount; Mount, Transmission Mounting
- Item Weight: 3.50 Pounds
- Item Dimensions: 7.7 x 5.6 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 94856858
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Prizm Submodels:
- Base, LSi | 4 Cyl 1.8 L GAS
View related parts
2000 Chevrolet Prizm Side Mount Bracket Part Number: 94856682
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Item Weight: 3.30 Pounds
- Item Dimensions: 8.2 x 4.0 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 94856682
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Prizm Submodels:
- Base, LSi | 4 Cyl 1.8 L GAS
View related parts
2000 Chevrolet Prizm Transmission Mount Part Number: 94856856
Product Specifications
- Other Name: Trans Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Side Mount; Mount, Transmission Mounting
- Item Weight: 3.50 Pounds
- Item Dimensions: 5.7 x 5.3 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 94856856
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Prizm Submodels:
- Base, LSi | 4 Cyl 1.8 L GAS
View related parts
2000 Chevrolet Prizm Transmission Mount Part Number: 94859566
Product Specifications
- Other Name: Mount, Transmission Mounting; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Front Mount
- Position: Front
- Item Weight: 3.00 Pounds
- Item Dimensions: 6.8 x 4.3 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 94859566
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Prizm Submodels:
- Base, LSi | 4 Cyl 1.8 L GAS
View related parts
2000 Chevrolet Prizm Transmission Mount Part Number: 94859565
Product Specifications
- Other Name: Mount, Transmission Mounting; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Front Mount
- Position: Front
- Item Weight: 2.80 Pounds
- Item Dimensions: 7.0 x 4.4 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 94859565
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Prizm Submodels:
- Base, LSi | 4 Cyl 1.8 L GAS
View related parts
2000 Chevrolet Prizm Transmission Mount Part Number: 94856851
Product Specifications
- Other Name: Mount, Transmission Mounting; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount
- Position: Rear
- Item Weight: 3.00 Pounds
- Item Dimensions: 6.6 x 5.3 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 94856851
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Prizm Submodels:
- Base, LSi | 4 Cyl 1.8 L GAS

2000 Chevrolet Prizm Motor And Transmission Mount

With a comprehensive array of OEM 2000 Chevrolet Prizm Motor And Transmission Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Prizm Motor And Transmission Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Prizm Motor And Transmission Mount Parts and Q&A

Q: How to Replace a Motor and Transmission Mount on 2000 Chevrolet Prizm?
A: Raising the vehicle by using the engine support fixture; then install the hand of the front transaxle mount. Then remove the right hand and left hand splash shields, and remove the two bolts from the front transaxle. To follow that, take away the insulator to the mount bracket and the two front transaxle bracket bolts and the bracket from the transaxle. For installation, start with the front transaxle bracket and bolts installation, tighten them to 60 nm (44 ft. Lbs). Finally, the insulator should be installed to the mount bracket and the front transaxle mount through bolt (tigthened up to 60 Nm (44 ft. Lbs.). Mount the 2 bolts at the front transaxle mount and make sure they are tightened at 60 nm (44 ft. Lbs.) as well. Lastly, replace splah shields, left hand, and right hand with lowering the vehicle and removing engine support fixture.