OEM 2000 Chevrolet Prizm Oxygen Sensor

2000 Chevrolet Prizm Parts Questions & Experts Answers

• Q: How to service and repair the Oxygen Sensor 2 on 2000 Chevrolet Prizm?

  A: Customers need to start Oxygen Sensor 2 service and repair by taking out the front floor console while drawing back carpet on the passenger side near the console floor. The ho2s 2 electrical connector must first be detached before uninstalling the ho2s wiring below the floor heat duct. First raise and properly secure the vehicle afterward remove the wiring along with the body plug from the Floor Pan. The service technician should next extract ho2s 2 from the exhaust tailpipe according to safety protocols to prevent Exhaust Pipe thread wear when temperatures reach above 48°c (120°F). The new ho2s 2 must have its anti-seize coating intact before you install it into the Exhaust Pipe with a torque of 44 n.m (32 lb ft). First lower the vehicle and fit the Floor Pan wiring and body plug followed by passing the ho2s wiring under the heater floor duct. Then reconnect the ho2s 2 electrical connector to its place. Reposition the passenger side carpet to cover the console region and replace the front floor console as the last step.