How to replace the rear brake line (Caliper) on 2000 Chevrolet Suburban 1500?

Begin seat the vehicle and take out the tire and wheel to replace the rear brake hose at the caliper. Unload gunk from the hose fittings before you remove the hose connection at the brake pipe. Take out the brake hose by removing its retaining clip first. Then remove the brake hose bolt from the axle and brake hose mounting bolt with the washers at the caliper which also needs a new bolt to dissassemble the assembly. Place the new brake hose properly into position without twisting it and fasten it with the brake hose mounting bolt and fresh caliper compression washers. Secure the bolt with a torque of 45 n.m (33 lb.ft). After that you need to mount the brake hose bolt and bracket onto the axle while applying 18 pounds of torque. Following that put on the brake hose retaining clip. Connect the brakepipe while tightening both ends to 25 newton meters then complete the brake system bleed. Reposition the tire and wheel unit before you take off the safety stands and drop the vehicle to the ground.

OEM 2000 Chevrolet Suburban 1500 Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Lines found

View related parts
2000 Chevrolet Suburban 1500 Flex Hose, Front Passenger Side Part Number: 19366696
$39.94 MSRP: $77.50
You Save: $37.56 (49%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Passenger Side
- Replaced by: 19435352
- Item Weight: 1.10 Pounds
- Item Dimensions: 28.1 x 3.0 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366696
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Suburban 1500 Submodels:
- Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2000 Chevrolet Suburban 1500 Flex Hose, Front Driver Side Part Number: 19366695
$41.40 MSRP: $77.27
You Save: $35.87 (47%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Driver Side
- Replaced by: 19435351
- Item Weight: 5.50 Pounds
- Item Dimensions: 3.2 x 27.5 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366695
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Suburban 1500 Submodels:
- Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2000 Chevrolet Suburban 1500 Flex Hose, Rear Part Number: 19366703
$38.84 MSRP: $76.03
You Save: $37.19 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaced by: 19540526
- Replaces: 21999534, 15749471, 15884704, 22163786, 19331534, 15102354
- Item Weight: 0.70 Pounds
- Item Dimensions: 12.4 x 2.7 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366703
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Suburban 1500 Submodels:
- Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2000 Chevrolet Suburban 1500 Flex Hose, Rear Driver Side Part Number: 19366704
$36.15 MSRP: $70.15
You Save: $34.00 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaced by: 19540527
- Replaces: 15102353, 15884703, 21999533, 22163785, 19331533, 15749470
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.1 x 2.0 x 12.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366704
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Suburban 1500 Submodels:
- Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2000 Chevrolet Suburban 1500 Flex Hose, Rear Part Number: 19366659
$45.81 MSRP: $89.68
You Save: $43.87 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 15772883
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.1 x 2.1 x 18.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366659
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Suburban 1500 Submodels:
- Base, LS, LT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

2000 Chevrolet Suburban 1500 Brake Line

With a comprehensive array of OEM 2000 Chevrolet Suburban 1500 Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Suburban 1500 Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Suburban 1500 Brake Line Parts and Q&A

Q: How to replace the rear brake line (Caliper) on 2000 Chevrolet Suburban 1500?
A: Begin seat the vehicle and take out the tire and wheel to replace the rear brake hose at the caliper. Unload gunk from the hose fittings before you remove the hose connection at the brake pipe. Take out the brake hose by removing its retaining clip first. Then remove the brake hose bolt from the axle and brake hose mounting bolt with the washers at the caliper which also needs a new bolt to dissassemble the assembly. Place the new brake hose properly into position without twisting it and fasten it with the brake hose mounting bolt and fresh caliper compression washers. Secure the bolt with a torque of 45 n.m (33 lb.ft). After that you need to mount the brake hose bolt and bracket onto the axle while applying 18 pounds of torque. Following that put on the brake hose retaining clip. Connect the brakepipe while tightening both ends to 25 newton meters then complete the brake system bleed. Reposition the tire and wheel unit before you take off the safety stands and drop the vehicle to the ground.