Make sure this part fits

GM 19366695
Flex Hose, Front Driver Side

1999-2007 GM

Customer Questions & Expert Answers (15)
GM 19366695 Flex Hose, Front Driver Side
GM 19366695 Flex Hose, Front Driver Side
  • Part Description
    Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Front Driver Side
  • Replaced By
    19435351
  • Manufacturer
    General Motors
Make sure this part fits
$41.40 MSRP: $77.27
You Save: $35.87 (47%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    1999-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2000-2006 Chevrolet Suburban 1500Base, LS, LT, LTZ, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2006 Chevrolet Suburban 2500Base, LS, LT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2000-2006 Chevrolet TahoeBase, Limited, LS, LT, Z718 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19366695 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19366695 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you secure the brake hose after installation for the 2004 Cadillac Escalade EXT? Posted by Customer
    A:
    Install the brake hose into the mounting bracket and secure it with the brake hose retaining clip.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Line
    Q:
    How do you remove the brake hose for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Remove the junction block retaining bolt from the axle and take out the brake hose from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Line
    Q:
    What is the final step after replacing the brake pipe for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Bleed the hydraulic brake system.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Line
    Q:
    What should be done with the copper brake hose gaskets for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Discard the 2 copper brake hose gaskets, which may be stuck to the brake caliper housing or the brake hose end.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Line
    Q:
    What is the first step to replace the rear brake hose for the 2004 Chevrolet Suburban 1500? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Line
    Q:
    What is the torque specification for tightening the brake hose to caliper bolt for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Tighten the bolt to 40 Nm (30 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Line
    Q:
    What should you verify after connecting the brake pipe fitting for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Verify that the hose does not contact any part of the suspension; if it does, remove the hose and correct the condition.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Line
    Q:
    What should be done after connecting the rear brake pipes to the junction block for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Tighten the fitting to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Line
    Q:
    How do you attach the brake pipes during installation for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Attach the left and right brake pipes to the jounce hose junction block, tightening the fitting to 25 N.m (18 lb ft), and reinstall the jounce hose to the bracket.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Line
    Q:
    What should be used for installation of the new brake hose for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Use 2 new copper brake hose gaskets, assembling them with the brake hose bolt to the brake hose.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Line
    Q:
    What should be verified after connecting the brake pipe fitting for the 2004 GMC Yukon? Posted by Customer
    A:
    Verify that the hose does not contact any part of the suspension; if it does, remove the hose and correct the issue.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Line
    Q:
    What is the first step to replace the rear brake hose for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Line
    Q:
    How do you disconnect the rear brake pipes from the junction block for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Disconnect the rear brake pipes from the junction block on the rear axle and cap or plug the brake pipe fitting ends.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Line
    Q:
    What should be done after securing the new brake hose for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Attach the brake hose bolt and bracket to the axle, tightening this bolt to 25 Nm (18 ft. lbs.), and install the brake hose retaining clip.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Flex Hose, Front Driver Side 19366695 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19366695 Flex Hose, Front Driver Side is available in the market under the name GM Brake Line, Hydraulic Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19366695 Flex Hose, Front Driver Side fits certain Chevrolet Tahoe, Silverado 1500, Suburban 1500 models, as well as GMC Sierra 1500, Yukon, Yukon XL 1500. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 19366695 maintains top performance when functioning as the Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line unit at its Front Driver Side. The component 19366695 is constructed from durable material and its dimensions span 3.2 x 27.5 x 2.0 inches while weighing 5.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 19366695 has available replacement options listed under 19435351. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.