Make sure this part fits

GM 19366696
Flex Hose, Front Passenger Side

1999-2007 GM

Customer Questions & Expert Answers (29)
GM 19366696 Flex Hose, Front Passenger Side
GM 19366696 Flex Hose, Front Passenger Side
  • Part Description
    Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Front Passenger Side
  • Replaced By
    19435352
  • Manufacturer
    General Motors
Make sure this part fits
$39.16 MSRP: $75.98
You Save: $36.82 (49%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    1999-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2000-2006 Chevrolet Suburban 1500Base, LS, LT, LTZ, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2006 Chevrolet Suburban 2500Base, LS, LT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2000-2006 Chevrolet TahoeBase, Limited, LS, LT, Z718 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19366696 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19366696 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you secure the brake hose after installation for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Install the brake hose into the mounting bracket and secure it with the brake hose retaining clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done with the copper brake hose gaskets for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Discard the 2 copper brake hose gaskets, which may be stuck to the brake caliper housing or the brake hose end.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What tool is used to replace the brake pipe for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    The J 45405 Pipe Flaring Tool Kit.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you disconnect the brake pipe fitting from the brake hose for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Use a backup wrench on the brake hose fitting end to disconnect the brake pipe fitting end from the brake hose, then cap or plug the brake pipe fitting end.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the next step after removing the jounce hose for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Disconnect the 2 rear brake pipes from the junction block on the rear axle and cap or plug the brake pipe fitting ends.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be confirmed after connecting the brake pipe fittings for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Confirm that the hose does not contact any part of the suspension; if it does, remove the hose and correct the issue.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after removing the jounce hose from the bracket for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Detach the left and right brake pipes from the jounce hose junction block, remove the junction block mounting bolt from the axle, and then remove the jounce hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be ensured regarding the routing and retention of replacement pipes for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Ensure proper routing and retention of the replacement pipes using the correct fasteners in their original locations to avoid damage that could lead to personal injury.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the installation process for the new brake hose for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Assemble 2 new copper brake hose gaskets with the brake hose bolt to the brake hose, then install the brake hose to caliper bolt and 2 new washers to the brake caliper, tightening the bolt to 40 Nm (30 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you connect the brake pipe fitting nut to the brake hose for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the rubber cap or plug from the exposed brake pipe fitting end and connect the brake pipe fitting nut to the brake hose using a backup wrench on the hose fitting without bending the bracket or the pipe, tightening it to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the torque specification for tightening the brake pipe fittings for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Tighten them to 20 Nm (115 ft. lbs.) for the BPMV or wheel jounce hoses and to 30 Nm (22 ft. lbs.) for the master cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you connect the brake pipe for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Connect the brake pipe and tighten the fitting to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the rear brake hose (Jounce) for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Raise and support the vehicle and clean all dirt and foreign material from the brake hose and brake pipe fittings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What can improper routing and retention of brake pipes lead to for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Improper routing and retention can lead to damage and potential personal injury.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What tools are needed to service and repair the brake pipes for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    The J 45405 Brake Pipe Flaring Kit (J 45405) is needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the front brake hose for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done with the brake hose to caliper bolt and gaskets for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Remove the brake hose to caliper bolt from the brake caliper and discard the 2 copper brake hose gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you disconnect the brake pipe fitting from the brake hose for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Use a backup wrench to disconnect the brake pipe fitting from the brake hose, then cap or plug the fitting end.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done to prevent fluid loss and contamination for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Clean any dirt from the brake hose end and brake pipe fitting, and install a rubber cap or plug on the exposed brake pipe fitting.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What components need to be removed after disconnecting the brake hose for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Remove the brake hose retaining clip from the hose mounting bracket, the brake hose bolt and bracket from the upper control arm and the steering knuckle, and the brake hose to caliper bolt from the brake caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What final steps should be taken after installing the brake hose for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Bleed the hydraulic brake system, install the tire and wheel assembly, and check that the hose does not contact any part of the suspension or wheel during extreme right and left turns; if it does, remove the hose and correct the condition before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you connect the brake pipe fitting nut to the brake hose for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the rubber cap or plug from the brake pipe fitting end and connect the brake pipe fitting nut to the brake hose using a backup wrench on the hose fitting.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the next step after removing the brake hose for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Place the rear brake hose and install the junction block retaining bolt to the axle, tightening it to 22 Nm (16 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done to the hose fittings before disconnecting the jounce hose for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Clean all dirt, grease, or foreign material from the hose fittings.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What components need to be removed after disconnecting the brake pipe fitting for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Remove the brake hose retaining clip from the hose mounting bracket, followed by the brake hose bolt and bracket from the upper control arm and the steering knuckle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be removed from the mounting bracket for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Remove the brake hose retaining clip and take out the brake hose from the bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the torque specification for connecting the brake pipe for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Tighten the fitting to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the final step in the brake pipe replacement procedure for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Bleed the hydraulic brake system to complete the procedure.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Flex Hose, Front Passenger Side 19366696 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19366696 Flex Hose, Front Passenger Side is available in the market under the name GM Brake Line, Hydraulic Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19366696 Flex Hose, Front Passenger Side fits certain Chevrolet Tahoe, Silverado 1500, Suburban 1500 models, as well as GMC Sierra 1500, Yukon, Yukon XL 1500. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 19366696 maintains top performance when functioning as the Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line unit at its Front Passenger Side. The component 19366696 is constructed from durable material and its dimensions span 28.1 x 3.0 x 2.4 inches while weighing 1.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 19366696 has available replacement options listed under 19435352. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.