OEM 2000 Chevrolet Venture Power Steering Pump

2000 Chevrolet Venture Power Steering Pump Parts Questions & Experts Answers

• Q: How to replace the power steering pump on 2000 Chevrolet Venture?

  A: Starting the process to replace the Power Steering Pump requires removal of the accessory Drive Belt from its position on the pump then disconnecting the pressure hose along with the return hose. The first step involves removing the Power Steering Pump bolts from the unit before extracting the element from the car. After extracting the Power Steering Pump you can proceed to detach both the reservoir and pulley. First install the reservoir against the pump before installing the Power Steering Pump pulley. Put the pump in its original position and apply torque to Power Steering Pump bolts at 34 nm (25 ft. Lbs.). Reinstall the power steering Drive Belt after you reconnect both the pressure and return hoses to the pump. The power steering system needs to be filled with fluid followed by a bleeding process to eliminate air bubbles and a leak inspection.