How to replace the wiper arm on 2001 Buick Regal?

Before you begin mounting the new Wiper Arm engage the ignition then set the Wiper Switch to delay before turning the ignition off when wiper arms reach the bottom of their movement. Take off the Wiper Arm nut by loosening its washer hose connection at the washer nozzle then removing the cover. The Wiper Arm puller (J 39822) allows you to separate the Wiper Arm from its connection on the wiper transmission drive shaft. To install position the measuring tool perpendicular to the Wiper Blade then put a pin or drill bit of the same size into the Wiper Arm to release the spring tension. Put both wiper arms onto their respective wiper transmission drive shafts while confirming that the right arm measures 97-107 millimeters (3.82-4.21 inches) from the wiper end to the air inlet screen and the left arm starts 125-147 millimeters (4.92-5.78 inches) from the wiper tip to the screen. Hand-tighten the Wiper Arm nut till it reaches the torque level of 30 n.m or 22 lb ft. Reinstall the wiper cover after taking the pin from the Wiper Arm and connect the washer hose back to the washer nozzle. Check Windshield Wiper performance by running the system.

OEM 2001 Buick Regal Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Wiper Arms found

View related parts
2001 Buick Regal Wiper Arm, Driver Side Part Number: 15237916
$57.38 MSRP: $89.89
You Save: $32.51 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Windshield Wiper Arm; Wiper Arm Assembly
- Position: Driver Side
- Replaces: 10424403, 10413089, 10296181, 10300574
- Item Weight: 1.20 Pounds
- Item Dimensions: 25.6 x 1.8 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15237916
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Regal Submodels:
- 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
2001 Buick Regal Crank Arm Part Number: 12494832
$78.39 MSRP: $139.98
You Save: $61.59 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly, Windshield Wiper Motor Crank; Arm, Windshield Wiper Motor Drive
- Replaces: 12367235, 12367241, 22144098
- Item Weight: 1.30 Pounds
- Item Dimensions: 8.1 x 4.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12494832
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Regal Submodels:
- 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
2001 Buick Regal Wiper Blade Refill Part Number: 22143943
Product Specifications
- Other Name: Wiper, Windshield Wiper Blade; Windshield Wiper Blade Refills; Wiper Blade Insert; Wiper Insert; Blade Insert; Blade Assembly Insert; Insert; Wiper, Windshield Wiper; Wiper Blade
- Item Weight: 0.60 Pounds
- Item Dimensions: 25.1 x 3.5 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22143943
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Regal Submodels:
- GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
2001 Buick Regal Wiper Arm, Passenger Side Part Number: 15237915
$53.77 MSRP: $96.02
You Save: $42.25 (44%)
Product Specifications
- Other Name: Arm, Windshield Wiper Arm; Wiper Arm Assembly
- Position: Passenger Side
- Replaces: 10296180, 10299632, 10300573, 10413088, 10435214, 10418682, 10424402, 10418542, 10424401, 22155308
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.7 x 26.7 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15237915
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Regal Submodels:
- 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS

2001 Buick Regal Wiper Arm

With a comprehensive array of OEM 2001 Buick Regal Wiper Arm, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Buick Regal Wiper Arm are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Buick Regal Wiper Arm Parts and Q&A

Q: How to replace the wiper arm on 2001 Buick Regal?
A: Before you begin mounting the new Wiper Arm engage the ignition then set the Wiper Switch to delay before turning the ignition off when wiper arms reach the bottom of their movement. Take off the Wiper Arm nut by loosening its washer hose connection at the washer nozzle then removing the cover. The Wiper Arm puller (J 39822) allows you to separate the Wiper Arm from its connection on the wiper transmission drive shaft. To install position the measuring tool perpendicular to the Wiper Blade then put a pin or drill bit of the same size into the Wiper Arm to release the spring tension. Put both wiper arms onto their respective wiper transmission drive shafts while confirming that the right arm measures 97-107 millimeters (3.82-4.21 inches) from the wiper end to the air inlet screen and the left arm starts 125-147 millimeters (4.92-5.78 inches) from the wiper tip to the screen. Hand-tighten the Wiper Arm nut till it reaches the torque level of 30 n.m or 22 lb ft. Reinstall the wiper cover after taking the pin from the Wiper Arm and connect the washer hose back to the washer nozzle. Check Windshield Wiper performance by running the system.