OEM 2001 Cadillac Catera Ignition Coil

2001 Cadillac Catera Ignition Coil Parts and Q&A

• Q: How to replace the ignition coil for Bank 2 on 2001 Cadillac Catera?

  A: To change Ignition Coil for bank 2 start removing the bolts from the wiring harness channel from the intake plenum and the vacuum supply fitting and the a/c bracket from the intake plenum, and oil filter extension. Untap the cmp sensor electrical connector and remove the plastic vacuum lines from the wiring harness channel position the wiring channel out of the way. The next step will vent and remove the coil pack by disconnecting the coil pack electrical connector and coil pack retainer bolts making sure not to over tighten. J43301 coil pack remover (j43301). Feed the j 43301 through the coil pack and, using even pressure, raise and pull the coil pack. Check the seal of coil packs, as well as the spark boot boots, to make sure they are not damaged or worn, updating them if needed. Align the Spark Plug boots to the spark plugs, then press and seat the coil pack gently. To install, coil pack retainer bolts, 8 n.m (71 lb in), and attach the coil pack electricity connector. Move the wiring channel and the plastic vacuum lines in the wiring harness channel, and connect the cmp sensor electrical connector. Lastly, install the a/c bracket, the vacuum supply fitting to the Intake Manifold, and the wiring harness channel bolt to an 8n.m (71 lb in) torque.