How to replace the power seat switch on 2001 Cadillac Seville?

Disabling the sir system should be the initial step when replacing the power Seat Switch. Before working on fasteners located at the back of the front seat cushion assembly adjust both the front assembly and the seat up and forward. First remove the rear fasteners before moving the front seat assembly toward the back of the vehicle. A proper angle of the front seat cushion section reveals the access to front fasteners while allowing you to remove them. When removing the front seat cushion assembly maintain the position of the lumbar switch knob as it is part of the lumbar switch assembly. Extract the installed knobs from the Seat Switch and the Seat Switch trim plate bezel. The door trim pad clip remover (J 38778) tool allows removal of switch bracket retainers after lifting the front seat cushion cover to reveal the Seat Switch. First detach the locking mechanisms of the switch mounting bracket then take out the switches and bracket assembly from the seat bottom frame. A flat-bladed tool will help you remove the switch from the mounting bracket before you disconnect the electrical connector from the seat switches. Begin by connecting the electrical connector to the switch before you install the switch to the mounting bracket and fix the seat switches to the seat bottom frame. After placing the switch bracket retainers in the seat bottom frame position the seat cover down while lining up holes on the cover to the switch assembly. After installing the front fasteners onto the seat cushion assembly it is possible to adjust the front seat assembly up and forward to access the rear fasteners which should be tightened to 9 n.m (80 lb in). The front section of the front seat cushion needs to be tilted while installing front fasteners that need to be tightened to 9 n.m (80 lb in). Enable the sir system after installing the knob and switch trim plate bezel to their respective positions.

OEM 2001 Cadillac Seville Seat Switch

Seat Adjust Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Seat Switches found

View related parts
2001 Cadillac Seville Seat Switch, Front Passenger Side Part Number: 25646340
$157.48 MSRP: $235.41
You Save: $77.93 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Front Seat Adjuster; Power Seat Switch; Adjuster Switch; Switch
- Position: Front Passenger Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.2 x 3.3 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25646340
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS
View related parts
2001 Cadillac Seville Switch, Driver Side Part Number: 25646341
$146.12 MSRP: $218.41
You Save: $72.29 (34%)
Product Specifications
- Other Name: Switch, Seat Adjuster/Recliner; Power Seat Switch; Adjuster; Switch, Front Seat Adjuster
- Position: Driver Side
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.9 x 3.3 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25646341
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS
View related parts
2001 Cadillac Seville Switch Part Number: 25692452
Product Specifications
- Other Name: Switch, Front/Rear Seat Heater; Seat Heater Switch
- Position: Driver Side
- Replaces: 25635322
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 1.8 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25692452
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS
View related parts
2001 Cadillac Seville Switch, Gray, Front Part Number: 25710667
Product Specifications
- Other Name: Switch, Front Seat Adjuster; Power Seat Switch; Switch, Front Seat Lumbar
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.4 x 1.7 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25710667
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS
View related parts
2001 Cadillac Seville Switch, Driver Side Part Number: 25692519
Product Specifications
- Other Name: Switch Assembly, Driver Seat Adjuster Memory; Power Seat Switch; Switch, Front Seat Adjuster
- Position: Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.3 x 2.7 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25692519
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS
View related parts
2001 Cadillac Seville Switch, Front Part Number: 25708722
Product Specifications
- Other Name: Switch, Front Seat Lumbar; Power Seat Switch
- Position: Front
- Replaces: 25692002
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.6 x 1.7 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25708722
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS
View related parts
2001 Cadillac Seville Switch Part Number: 25692454
Product Specifications
- Other Name: Switch, Front/Rear Seat Heater; Seat Heater Switch
- Position: Rear
- Replaces: 25648281
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.1 x 1.5 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25692454
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS
View related parts
2001 Cadillac Seville Lumbar Switch, Front Part Number: 84546258
Product Specifications
- Other Name: Switch Assembly-Front Seat Lumbar *Shale; Power Seat Switch; Switch; Switch, Front Seat Lumbar
- Position: Front
- Replaces: 25710662, 20892887
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84546258
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS
View related parts
2001 Cadillac Seville Adjust Knob, Front Part Number: 25648284
Product Specifications
- Other Name: Knob, Front Seat Adjuster; Knob
- Position: Front
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.8 x 1.6 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25648284
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS
View related parts
2001 Cadillac Seville Adjust Knob, Black, Front Part Number: 25662946
Product Specifications
- Other Name: Knob, Front Seat Adjuster; Knob
- Position: Front
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.7 x 1.6 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25662946
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS
View related parts
2001 Cadillac Seville Adjust Knob, Gray, Front Driver Side Part Number: 25699496
Product Specifications
- Other Name: Knob, Front Seat Adjuster; Knob
- Position: Front Driver Side
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.2 x 1.1 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25699496
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS
View related parts
2001 Cadillac Seville Switch, Black, Front Part Number: 25710664
Product Specifications
- Other Name: Power Seat Switch; Switch, Front Seat Lumbar
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.4 x 1.8 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25710664
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS

2001 Cadillac Seville Seat Switch

With a comprehensive array of OEM 2001 Cadillac Seville Seat Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Cadillac Seville Seat Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Cadillac Seville Seat Switch Parts and Q&A

Q: How to replace the power seat switch on 2001 Cadillac Seville?
A: Disabling the sir system should be the initial step when replacing the power Seat Switch. Before working on fasteners located at the back of the front seat cushion assembly adjust both the front assembly and the seat up and forward. First remove the rear fasteners before moving the front seat assembly toward the back of the vehicle. A proper angle of the front seat cushion section reveals the access to front fasteners while allowing you to remove them. When removing the front seat cushion assembly maintain the position of the lumbar switch knob as it is part of the lumbar switch assembly. Extract the installed knobs from the Seat Switch and the Seat Switch trim plate bezel. The door trim pad clip remover (J 38778) tool allows removal of switch bracket retainers after lifting the front seat cushion cover to reveal the Seat Switch. First detach the locking mechanisms of the switch mounting bracket then take out the switches and bracket assembly from the seat bottom frame. A flat-bladed tool will help you remove the switch from the mounting bracket before you disconnect the electrical connector from the seat switches. Begin by connecting the electrical connector to the switch before you install the switch to the mounting bracket and fix the seat switches to the seat bottom frame. After placing the switch bracket retainers in the seat bottom frame position the seat cover down while lining up holes on the cover to the switch assembly. After installing the front fasteners onto the seat cushion assembly it is possible to adjust the front seat assembly up and forward to access the rear fasteners which should be tightened to 9 n.m (80 lb in). The front section of the front seat cushion needs to be tilted while installing front fasteners that need to be tightened to 9 n.m (80 lb in). Enable the sir system after installing the knob and switch trim plate bezel to their respective positions.