How to replace the Camshaft Position Sensor on 2001 Chevrolet Impala?

A replacement of the camshaft position (CMP) sensor begins with turning off the ignition before removing the Power Steering Pump. Disconnect the cmp sensor yet remove its attaching bolt and the sensor itself. When keeping the sensor check its o-ring for damage along with any evidence of wear and cracks or leakage. Cleaning engine oil should be used to lubricate the o-ring before installing the component. Replace the o-ring when it shows any damage signs. Place the Camshaft Position Sensor in position then fasten the retaining bolt to 10 n.m (89 lb in). The cmp sensor electrical connector needs to be connected following Power Steering Pump reinstallation.

OEM 2001 Chevrolet Impala Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Position Sensors found

View related parts
2001 Chevrolet Impala Camshaft Position Sensor
Part Number: 10456148
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Crankshaft Position Sensor; Crankshaft Sensor; Camshaft Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.3 x 2.3 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10456148
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Impala Submodels:
- Base, LS, LS Sport, Police, SS | 6 Cyl 3.8 L GAS
View related parts
2001 Chevrolet Impala Camshaft Position Sensor
Part Number: 12567650
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Replaces: 24507588
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.9 x 4.2 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12567650
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Impala Submodels:
- Base | 6 Cyl 3.4 L GAS

2001 Chevrolet Impala Camshaft Position Sensor

With a comprehensive array of OEM 2001 Chevrolet Impala Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Impala Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Impala Parts Questions & Experts Answers

Q: How to replace the Camshaft Position Sensor on 2001 Chevrolet Impala?
A: A replacement of the camshaft position (CMP) sensor begins with turning off the ignition before removing the Power Steering Pump. Disconnect the cmp sensor yet remove its attaching bolt and the sensor itself. When keeping the sensor check its o-ring for damage along with any evidence of wear and cracks or leakage. Cleaning engine oil should be used to lubricate the o-ring before installing the component. Replace the o-ring when it shows any damage signs. Place the Camshaft Position Sensor in position then fasten the retaining bolt to 10 n.m (89 lb in). The cmp sensor electrical connector needs to be connected following Power Steering Pump reinstallation.

Related 2001 Chevrolet Impala Parts

Alternate Year Models

2000 Chevrolet Impala Camshaft Position Sensor 2002 Chevrolet Impala Camshaft Position Sensor