Other Name: Tube, Air Conditioner Blower Motor Cooling; A/C Refrigerant Liquid Hose; A/C Hose; Tube, A/C Blower Motor Cooling; Tube, Heater Motor Cooling; Tube, Heater Blower Motor
Item Weight: 0.70 Pounds
Item Dimensions: 5.3 x 2.7 x 1.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52468304
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2001 Chevrolet Suburban 1500 Submodels:
Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2001 Chevrolet Suburban 1500 Submodels:
Base, LS, LT, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
2001 Chevrolet Suburban 1500 A/C Hose
With a comprehensive array of OEM 2001 Chevrolet Suburban 1500 A/C Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Suburban 1500 A/C Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2001 Chevrolet Suburban 1500 Parts Questions & Experts Answers
Q: How to Replace an A/C Hose for Suction Hose on 2001 Chevrolet Suburban 1500?
A: The first step to replace an a/c suction hose/line is to perform refrigerant recovery. The halogen leak detector model j 39400-a needs to be used for fittings leak tests following the installation process. First detach the suction hose mounting bolt from the compressor before breaking the suction hose connection to the compressor. Remove the compressor suction nut present at the accumulator followed by disconnecting the hose from the accumulator. Remove the suction hose assembly from the vehicle before discarding all used sealing washers while performing system opening capping. Start by adding the suction hose assembly to the vehicle then establish hose connection to the accumulator through new sealing washers. Install the compressor suction hose nut at the accumulator before tightening it to 16 n.m (12 lb ft). The suction hose installation requires new sealing washers that need to be attached to the compressor before installing the suction hose mounting bolt and tightening to 16 nm torque level (12 lb ft). Recharge together with evacuation of the a/c system completes the process.