Other Name: Tube, Air Conditioner Blower Motor Cooling; A/C Refrigerant Liquid Hose; A/C Hose; Tube, A/C Blower Motor Cooling; Tube, Heater Motor Cooling; Tube, Heater Blower Motor
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000-2006 Chevrolet Suburban 1500 | Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2000 Chevrolet Suburban 1500 | Base, LS, LT | 8 Cyl 5.3 L GAS
| Page 1 of 2 |Next >
1-20 of 22 Results
Chevrolet Suburban 1500 A/C Hose
Our website offers an extensive catalog of genuine Chevrolet Suburban 1500 A/C Hose at unbeatable prices. Every OEM Chevrolet Suburban 1500 A/C Hose comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Suburban 1500 A/C Hose Parts Questions & Experts Answers
Q: How to service the A/C Hose using the A/C Line Repair Kit (J 41425) on Chevrolet Suburban 1500?
A: Any damage in heater and A/C lines requires the A/C Line Repair Kit (J 41425) to make required repairs like rub-through or collision damage or leakage. The first step requires evacuation and charge operations on the A/C system while conducting pressure tests on A/C system joints. Cooling system heater lines need draining before this process begins. Position the vehicle under a support system and search for the affected area. Use a tubing cutter to cut the damaged line while it is necessary to clean at least 19 mm (0.75 in) of A/C line using the cleaning pad from the A/C Line Repair Kit (J 41425). Apply one drop of the sealing compound (J 41425-3) to each line end after preparing the A/C line with LOK prep sealant and install the correct LOK fitting. After insertion of the line ends into the fitting turn it once and check that the connector ends align with the correct placement. You must use tool (J 41425-1) over connectors while employing a 3/8 breaker bar to rotate forcing screw until LOK fitting's center shoulder receives connector collars at its base. Loosen the forcing screw with the tool then remove it before checking the fitting installation. The process requires buying a replacement line, applying section marks to both lines before cutting them, cleaning them with proper sealant, then executing the installation procedure again. After lowering the vehicle you must refill drained coolant before completing necessary leak tests along with A/C system charging.