Other Name: Tube, Air Conditioner Blower Motor Cooling; A/C Refrigerant Liquid Hose; A/C Hose; Tube, A/C Blower Motor Cooling; Tube, Heater Motor Cooling; Tube, Heater Blower Motor
Item Weight: 0.70 Pounds
Item Dimensions: 5.3 x 2.7 x 1.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 52468304
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2002 Chevrolet Suburban 1500 Submodels:
Base, LS, LT, LTZ, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2002 Chevrolet Suburban 1500 Submodels:
Base, LS, LT, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
2002 Chevrolet Suburban 1500 A/C Hose
With a comprehensive array of OEM 2002 Chevrolet Suburban 1500 A/C Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Suburban 1500 A/C Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2002 Chevrolet Suburban 1500 A/C Hose Parts and Q&A
Q: How to replace the auxiliary A/C Hose tubes on 2002 Chevrolet Suburban 1500?
A: The first step for new auxiliary a/c evaporator tube installation requires complete refrigerant recovery from the system. The maintenance professional must disconnect the auxiliary a/c evaporator tubes from their positions both on the condenser tube and accumulator. Obtain access to the clamp by first loosening the wheelhouse and then raise the vehicle. Beginning with the retaining nut and auxiliary a/c evaporator tubes removal from the auxiliary hvac module you must next detach the heater/a/c tubes retaining nut from the stud located at the frame. Exit the auxiliary a/c evaporator tubes from their clamps before taking them outside of the vehicle. Installation requires attaching the auxiliary a/c evaporator tubes to the vehicle after which you must secure them to the clamps. Install the heater/a/c tubes retaining nut to the stud at the frame while tightening it to 7 n.m (62 lb in). Install the auxiliary a/c evaporator tubes (2, 3) together with the retaining nut to the auxiliary hvac module while tightening it to 16 n.m (12 lb ft). Proceed to lower the vehicle then put in the right front wheelhouse. The auxiliary a/c evaporator tubes need installation between the condenser tube and the accumulator while tightening nuts to 16 n.m (12 lb ft). After refrigerant recharge and leak testing the fittings with the halogen leak detector (J 39400-A).