Other Name: Actuator Kit, Door Lock; Door Lock Actuator; Lock Actuator; Actuator; Actuator Kit, Door Electric And Vacuum Locks; Actuator Kit, Door And End Gate Electrical
Other Name: Latch Assembly-Rear Side Door Lower; Door Latch Assembly; Door Lock Cylinder; Trunk Latch; Door Lock; Lower Latch; Lock; Latch; Latch, Door Lock
Position: Rear Lower
Replaces: 15730667, 25784598, 20918764
Item Weight: 1.40 Pounds
Item Dimensions: 8.9 x 3.4 x 3.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 20935252
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Other Name: Actuator, Door Electric And Vacuum Locks; Door Lock Actuator Motor; Door Lock Actuator; Power Actuator; Latch Actuator; Lock Solenoid; Lock; Actuator; Actuator, Door And End Gate Electrical
Position: Front
Replaces: 22020256, 22049686
Item Weight: 0.90 Pounds
Item Dimensions: 7.4 x 3.9 x 2.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 22062740
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2001 GMC Safari Submodels:
Base, GT, SL, SLE, SLT, SLX | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
Other Name: Lock, Rear Side Door; Door Lock; Lock, Door Lock
Position: Rear
Replaces: 16638024
Item Weight: 1.00 Pounds
Item Dimensions: 6.2 x 3.1 x 3.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 15109043
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2001 GMC Safari Submodels:
Base, SL, SLE, SLT, SLX | 6 Cyl 4.3 L GAS
2001 GMC Safari Door Lock Actuator
With a comprehensive array of OEM 2001 GMC Safari Door Lock Actuator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 GMC Safari Door Lock Actuator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2001 GMC Safari Door Lock Actuator Parts and Q&A
Q: How to replace the power door lock actuator on 2001 GMC Safari?
A: In order to change the power door lock actuator, peel away the trim panel and detach the water deflector. Next remove the actuator to reach the remote lever rod and disconnect the wiring harness. Install the actuator It should then be reinstalled with the securing and the wiring reconnected and the water deflector and trim panel reassembled.