How to replace the Engine Mount Bracket on 2002 Buick Century?

Question

Accepted Answer

You need to start by disconnecting the negative Battery Cable followed by taking off the throttle body duct and the engine mount struts before proceeding. Raise and properly support the vehicle before removing the three-way catalytic converter pipe connected to the right (rear) exhaust manifold while also taking out the right front wheel along with tire together with the right engine splash shield. The vehicle must be lowered after you detach the Engine Mount Bracket-to-oil pan bolts. Apply the j 28467-b to lift the engine before you properly support the vehicle using a lift. Use tools to remove engine mount upper nuts before removing Engine Mount Bracket off its mount position. One must attach the Engine Mount Bracket to the engine mount by following the fastener notice in service precautions. After installing the engine mount upper nuts to a torque specification of 47 nm (35 ft. Lbs.), users should lower both the engine and the vehicle. Use proper support to lift the vehicle a second time before installing the Engine Mount Bracket onto the Oil Pan while locking down its bolts to 58 nm (43 ft. Lbs.). The vehicle repair process continues by placing back the right engine splash shield and right front wheel with tire followed by connecting the three-way catalytic converter pipe to the right Exhaust Manifold. To complete the procedure lower the vehicle then uninstall the engine support fixture before putting in engine mount struts and reinstalling the throttle body air inlet duct and finishing by reconnecting the battery ground (negative) cable.

OEM 2002 Buick Century Engine Mount Bracket

3 Engine Mount Brackets found

2002 Buick Century Mount Bracket

2002 Buick Century Strut Mount

2002 Buick Century Mount Bracket

2002 Buick Century Engine Mount Bracket

2002 Buick Century Parts Questions & Experts Answers

Related 2002 Buick Century Parts

Alternate Year Models