Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 10216970
Mount Bracket

1993-2011 GM

Customer Questions & Expert Answers (61)
GM 10216970 Mount Bracket
GM 10216970 Mount Bracket
GM 10216970 Mount Bracket
  • Part Description
    Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 10216970 Mount Bracket is Ref No. 3 in the diagram below

    2001 Chevy Impala Mount Bracket Diagram for 10216970
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 10216970

  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number10216970
    Part DescriptionBracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount
    Other NamesEngine Bracket; Lower Bracket; Bracket
    Item Dimensions9.2 x 3.5 x 1.8 inches
    Item Weight1.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU10216970
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2004 Buick CenturyCustom, Limited6 Cyl 3.1 L GAS
    1994-1996 Buick RegalCustom6 Cyl 3.1 L GAS
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2000-2011 Chevrolet Impala50th Anniversary Edition, Base, LS, LT, LTZ, Police6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    1995-2001 Chevrolet LuminaBase, LS, LTZ6 Cyl 3.1 L GAS
    1995-2007 Chevrolet Monte CarloLS, LS Competition, LS Sport, LT, LTZ6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1993-1997 Oldsmobile Cutlass SupremeBase, International, S, SL6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
    View More

  • Customer Questions & Expert Answers

    Q:
    Is this 10216970 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10216970 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    Which component should be removed from the right (rear) exhaust manifold for the 2000 Buick Century? Posted by Customer
    A:
    Remove the three-way catalytic converter pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What conditions indicate that the engine mount should be replaced for the 2002 Buick Century? Posted by Customer
    A:
    Replace the engine mount if the hard rubber surface is covered with heat check cracks, if the rubber is separated from the metal plate, or if the rubber is split through the center.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What bolts need to be removed next for the 2002 Buick Century? Posted by Customer
    A:
    Remove the engine mount bracket-to-oil pan bolts, followed by the engine mount and engine mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the torque specification for securing the engine mount upper nuts for the 2003 Buick Century? Posted by Customer
    A:
    Secure the engine mount upper nuts, tightening them to 47 Nm (35 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the next step after raising the engine for the 2002 Buick Century? Posted by Customer
    A:
    Remove the engine mount upper nuts and take off the engine mount bracket from the engine mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    How should the upper nuts be installed for the 2004 Buick Rendezvous? Posted by Customer
    A:
    Install the upper nuts, tightening them to 53 Nm (39 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    How do you proceed after removing the necessary components for the 2003 Buick Century? Posted by Customer
    A:
    Remove the engine mount lower nuts and raise the engine using the engine support fixture.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How do you prevent damage when removing the engine mount bracket-to-oil pan bolts for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Insert a block of wood that spans the width of the oil pan bottom between the oil pan and the jack support.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after securing the mount/bracket for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Lower the engine until the mount/bracket is seated properly in the cradle, then install the engine mount lower nuts, tightening them to 47 Nm (35 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How do you detach the engine mount bracket from the engine mount for the 2007 Buick Terraza? Posted by Customer
    A:
    Remove the engine mount bracket to engine mount nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What additional tools may be needed during the process for the 2000 Buick Century? Posted by Customer
    A:
    Use the Engine Support Adapters (J28467-90A) and the Engine Support Adapter Leg Set (J36462-A) as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How do you detach the catalytic converter for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Detach the 3-way catalytic converter (TWC) pipe from the engine right side exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the final step after completing the installation for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Lower the vehicle, install the engine mount struts, the throttle body air inlet duct, and reconnect the battery ground (negative) cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after securing the engine mount for the 2007 Buick Terraza? Posted by Customer
    A:
    Attach the engine mount and bracket to the oil pan, followed by the engine mount bracket to oil pan bolts, tightening these to 58 N.m (43 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step in the installation process for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Install the engine mount bracket for AWD, followed by the bracket nuts, tightening them to 50 N.m (37 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after installing the engine mount for the 2006 Buick Terraza? Posted by Customer
    A:
    Lower the engine using the utility stand, then install the engine mount lower nuts, tightening them to 47 Nm (35 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What are the final steps after securing the engine mount bracket for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Reinstall the right engine splash shield, right front wheel and tire, and connect the catalytic converter pipe to the engine right side exhaust manifold before lowering the vehicle and reinstalling the engine mount struts and throttle body air inlet duct.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after removing the tire and wheel for the 2010 Chevrolet Impala? Posted by Customer
    A:
    Next, take off the engine splash shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after securing the engine mount bracket for the 2002 Chevrolet Impala? Posted by Customer
    A:
    Lower the vehicle and the engine, then raise the vehicle again to install the engine mount lower nuts, tightening them to 43 Nm (32 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done if there is movement between the metal plate of the engine mount and its attaching points for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Lower the engine and tighten the bolts or nuts that attach the engine mount to the frame or engine mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step to replace the engine mount bracket for the 2007 Chevrolet Impala? Posted by Customer
    A:
    First, remove the engine mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done after removing the engine mount and bracket for the 2005 Chevrolet Monte Carlo? Posted by Customer
    A:
    Take off the engine mount upper nuts and separate the engine mount from the engine mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after tightening the engine mount bracket bolts for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Raise the frame to its original position using the jackstands, install the right side frame bolts, and tighten both the right and left side frame bolts to 180 Nm (133 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after attaching the engine mount bracket for the 2010 Chevrolet Impala? Posted by Customer
    A:
    Secure the engine mount bracket to the mount nuts, tightening them to 50 Nm (37 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    How should the engine mount bracket be installed for the 2002 Chevrolet Impala? Posted by Customer
    A:
    Attach the engine mount bracket to the engine mount and tighten the upper nuts to 47 Nm (35 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done after removing the splash shield for the 2007 Chevrolet Impala? Posted by Customer
    A:
    Take off the engine mount to frame nuts and place an adjustable jack and a block of wood under the oil pan.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How should the engine mount upper nuts be secured for the 2000 Chevrolet Lumina? Posted by Customer
    A:
    Tighten them to 47 Nm (35 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after raising the engine for the 2006 Chevrolet Impala? Posted by Customer
    A:
    Remove the engine mount bracket bolts and then take out the engine mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    How should the engine mount bracket be installed for the 2001 Chevrolet Monte Carlo? Posted by Customer
    A:
    Attach the engine mount bracket to the engine mount, ensuring to install the engine mount upper nuts and tighten them to 47 Nm (35 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the first step to replace the engine mount for the 2009 Chevrolet Impala? Posted by Customer
    A:
    First, remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after installing the engine mount bracket for the 2006 Chevrolet Impala? Posted by Customer
    A:
    Lower the engine using the engine support fixture, remove the fixture, and install the upper engine mount nuts, also tightening them to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be verified before replacing an engine mount due to suspected fluid loss for the 2000 Chevrolet Monte Carlo? Posted by Customer
    A:
    Verify that the source of the fluid is the engine mount, not the engine or accessories.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step to replace the engine mount for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    Disconnect the battery ground cable and remove the throttle body air inlet duct.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after removing the upper engine mount nuts for the 2006 Chevrolet Monte Carlo? Posted by Customer
    A:
    Install the engine support fixture and raise the engine using it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done after removing the engine mount for the 2008 Chevrolet Impala? Posted by Customer
    A:
    Next, take off the engine mount bracket to mount nuts and then remove the engine mount bracket itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the final step before reconnecting the battery ground cable for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    Reconnect the three-way catalytic converter pipe to the right exhaust manifold, lower the vehicle, install the engine mount struts, and reinstall the throttle body air inlet duct.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the first step in the installation process for the 2000 Chevrolet Lumina? Posted by Customer
    A:
    Install the engine mount bracket to the engine mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What do you do after removing the engine mount/bracket for the 2008 Chevrolet Impala? Posted by Customer
    A:
    Position the new engine mount/bracket to the engine and install the engine mount bracket bolts, tightening them in the specified sequence to 50 N.m (37 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be verified before replacing an engine mount due to suspected fluid loss for the 2002 Chevrolet Monte Carlo? Posted by Customer
    A:
    Verify that the source of the fluid is the engine mount, not the engine or accessories.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be removed after detaching the catalytic converter pipe for the 2003 Chevrolet Monte Carlo? Posted by Customer
    A:
    Remove the right front wheel and tire, followed by the right engine splash shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How should the engine mount bracket be installed for the 2003 Chevrolet Monte Carlo? Posted by Customer
    A:
    Attach the engine mount bracket to the engine mount and tighten the upper nuts to 43 Nm (32 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done after removing the engine mount for the 2009 Chevrolet Impala? Posted by Customer
    A:
    Next, take off the engine mount bracket to mount nuts and then remove the engine mount bracket itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What components need to be removed along with the lower engine mount for the 2006 Chevrolet Monte Carlo? Posted by Customer
    A:
    Remove the lower engine mount nuts and the engine mount itself, along with the engine mount heat shield if necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be removed to access the engine mount for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Remove the right front tire and wheel, the right engine splash shield, and the power steering oil cooler pipe brackets from the frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the correct torque for the engine mount upper nuts during installation for the 2001 Chevrolet Monte Carlo? Posted by Customer
    A:
    Tighten the engine mount upper nuts to 47 Nm (35 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step in the installation process for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Attach the engine mount bracket to the engine mount, securing the nuts to 50 N.m (37 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done after raising the 2004 Chevrolet Venture? Posted by Customer
    A:
    Detach the three-way catalytic converter pipe from the engine right side exhaust manifold, remove the right front wheel and tire, and take off the right engine splash shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What bolts need to be removed to allow for the removal of the right engine mount strut bracket for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Remove the vertical engine mount strut bracket bolt and the lower engine mount strut bracket bolt from the right engine mount strut bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What are the steps for installation of the new engine mount bracket for the 2005 Chevrolet Monte Carlo? Posted by Customer
    A:
    Attach the engine mount bracket to the engine mount and install the engine mount upper nuts, tightening them to 43 Nm (32 ft. lbs.). Then, secure the engine mount bracket to the oil pan with bolts, tightening them to 58 Nm (43 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What are the installation steps for the engine mount bracket for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Attach the engine mount bracket to the engine mount, then install the engine mount upper nuts, tightening them to 53 Nm (39 ft. lbs.). Use the utility stand to lower the engine, then install the engine mount bracket to the oil pan and secure it with the engine mount bracket-to-oil pan bolts, tightening them to 58 Nm (43 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the final step after installing the bolts for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Reinstall the thermostat housing and attach the left engine mount strut to the left engine mount strut bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step to replace the left engine mount strut for the 2003 Chevrolet Venture? Posted by Customer
    A:
    First, remove the bolt and nut from the engine mount strut at the left engine mount strut bracket on the engine.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be verified before replacing any engine mount for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Verify that the source of the fluid is the engine mount, not the engine or accessories.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How do you remove the engine mount bracket for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Remove the engine mount bracket-to-oil pan bolts, insert a block of wood between the oil pan and the jack support, and place a block of wood between the utility stand and the oil pan before using the utility stand to raise the oil pan.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the next step after removing the engine mount bracket-to-oil pan bolts for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Remove the engine mount upper nuts and detach the engine mount bracket from the engine mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    How do you install the engine mount for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Attach the engine mount to the bracket, then secure the engine mount bracket to engine mount nuts, tightening them to 50 N.m (37 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the next step after installing the new engine mount bracket for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Install the engine mount upper nuts and tighten them to 53 Nm (39 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What components need to be reinstalled after the engine mount is secured for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Reinstall the right engine splash shield, the right front wheel and tire, and connect the three-way catalytic converter pipe to the engine right side exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What do you remove after raising the engine for the 2001 Chevrolet Venture? Posted by Customer
    A:
    The engine mount bracket-to-oil pan bolts, followed by the engine mount and bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    How do you remove the engine mount for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Remove the engine mount lower nuts, ensuring to insert a block of wood between the oil pan and jack support to prevent damage. Use a utility stand and a block of wood to raise the engine, then remove the engine mount bracket-to-oil pan bolts, followed by the engine mount and engine mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 10216970, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 10216970 Mount Bracket. It is sometimes referred to as GM Engine Mount, GM Engine Mount Bracket. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 10216970 Mount Bracket. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery