Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 10232891
Strut Mount

1995-2005 GM

Customer Questions & Expert Answers (25)
GM 10232891 Strut Mount
  • Part Description
    Bracket, Engine Lift; Torque Strut Mount; Motor Mount
  • Manufacturer
    General Motors
Make sure this part fits
$137.10 MSRP: $195.31
You Save: $58.21 (30%)
Ships in 1-2 Business Days
1
ADD TO CART

  • 10232891 Strut Mount is Ref No. 14 in the diagram below

    2001 Chevy Impala Strut Mount Diagram for 10232891
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 10232891

  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    1995-1996 Buick RegalCustom6 Cyl 3.1 L GAS
    2000-2005 Chevrolet ImpalaBase6 Cyl 3.4 L GAS
    1996-2001 Chevrolet LuminaBase, LS, LTZ6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
    1996-2005 Chevrolet Monte CarloLS, LS Competition, LS Sport, Z346 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    1995-1997 Oldsmobile Cutlass SupremeBase, SL6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
    1995-2003 Pontiac Grand PrixBase, SE6 Cyl 3.1 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 10232891 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10232891 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the engine mount for the 2003 Buick Century? Posted by Customer
    A:
    Disconnect the battery ground (negative) cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after lowering and the engine for the 2002 Buick Century? Posted by Customer
    A:
    Raise and suitably support the vehicle again to install the engine mount lower nuts, tightening them to 43 Nm (32 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What additional tools may be needed during the process for the 2000 Buick Century? Posted by Customer
    A:
    Use the Engine Support Adapters (J28467-90A) and the Engine Support Adapter Leg Set (J36462-A) as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What tool is used to raise the engine for the 2000 Buick Century? Posted by Customer
    A:
    Use the J28467-B Universal Engine Support Fixture.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done after removing the engine mount for the 2003 Buick Century? Posted by Customer
    A:
    Next, detach the engine mount bracket from the engine mount.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be verified before replacing an engine mount due to suspected fluid loss for the 2002 Buick Century? Posted by Customer
    A:
    Verify that the source of the fluid is the engine mount, not the engine or accessories.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the procedure for installing the new engine mount bracket for the 2002 Buick Century? Posted by Customer
    A:
    Attach the engine mount bracket to the engine mount, ensuring to follow the fastener notice in service precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done after removing the throttle body air inlet duct for the 2005 Chevrolet Monte Carlo? Posted by Customer
    A:
    Take out the engine mount struts and raise the vehicle securely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What equipment is needed to raise the engine for the 2002 Chevrolet Impala? Posted by Customer
    A:
    Install the Engine Support Adapters (J28467-9OA), Engine Support Adapter Leg Set (J36462-A), and Universal Engine Support Fixture (J28467-B).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What should be done if there is movement between the metal plate of the engine mount and its attaching points for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Lower the engine and tighten the bolts or nuts that attach the engine mount to the frame or engine mount bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be removed next for the 2002 Chevrolet Impala? Posted by Customer
    A:
    Remove the right front wheel and tire along with the right engine splash shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What components need to be removed before raising for the 2000 Chevrolet Lumina? Posted by Customer
    A:
    Remove the throttle body air inlet duct and the engine mount struts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be done after lowering for the 2000 Chevrolet Lumina? Posted by Customer
    A:
    Remove the Engine Support Fixture (J28467-B), Engine Support Adapter Leg Set (J36462-A), and Engine Support Adapters (J28467-9OA).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the procedure for reinstalling the catalytic converter for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Reinstall the catalytic converter to the right exhaust manifold and tighten the right exhaust manifold pipe stud nuts to 30 Nm (22 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What components need to be reinstalled after tightening the lower nuts for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    Reinstall the right engine splash shield, the right front wheel and tire, and connect the three-way catalytic converter pipe to the right rear exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the installation process for the engine mount for the 2003 Chevrolet Monte Carlo? Posted by Customer
    A:
    Attach the engine mount to the engine mount bracket, ensuring to tighten the upper nuts to 43 Nm (32 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What conditions indicate that the engine mount should be replaced for the 2000 Chevrolet Monte Carlo? Posted by Customer
    A:
    Replace the engine mount if the hard rubber surface has heat check cracks, the rubber is separated from the metal plate, or the rubber is split through the center.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the first step to replace the right engine mount bracket for the 2005 Chevrolet Monte Carlo? Posted by Customer
    A:
    Disconnect the battery ground cable and remove the throttle body air inlet duct.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What components need to be reattached after lowering for the 2001 Chevrolet Monte Carlo? Posted by Customer
    A:
    Reattach the right engine splash shield, right front wheel and tire, and connect the three-way catalytic converter pipe to the right (rear) exhaust manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What should be observed while raising the engine for the 2002 Chevrolet Monte Carlo? Posted by Customer
    A:
    Observe the engine mount for any signs of damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What components need to be removed before accessing the engine mount bracket for the 2001 Chevrolet Monte Carlo? Posted by Customer
    A:
    Remove the throttle body air inlet duct, engine mount struts, and raise the vehicle securely.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What components need to be removed next for the 2004 Chevrolet Monte Carlo? Posted by Customer
    A:
    Remove the three-way catalytic converter pipe from the right exhaust manifold, the right front wheel and tire, and the right engine splash shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    Q:
    What is the first step to replace the engine mount for the 2004 Chevrolet Impala? Posted by Customer
    A:
    Disconnect the negative battery cable and remove the fuel injector sight shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What is the final step in the installation process for the 2003 Chevrolet Monte Carlo? Posted by Customer
    A:
    Reconnect the three-way catalytic converter pipe to the right exhaust manifold, lower the vehicle, install the engine mount struts, and reinstall the throttle body air inlet duct before connecting the battery ground cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Engine Mount Bracket
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Strut Mount 10232891 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 10232891 Strut Mount is available in the market under the name GM Engine Mount, Engine Mount Bracket, Engine Torque Strut Mount. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 10232891 Strut Mount fits certain Chevrolet Impala, Lumina, Monte Carlo models, as well as Buick Regal, Century. Additionally, it is compatible with Pontiac Grand Prix and Oldsmobile Cutlass Supreme models.
The original GM component designated by manufacturer part number 10232891 maintains top performance when functioning as the Bracket, Engine Lift; Torque Strut Mount; Motor Mount unit. The component 10232891 is constructed from durable material and its dimensions span 8.4 x 4.7 x 3.0 inches while weighing 2.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Mount Bracket; Strut Bracket; Strut Mount Bracket; Strut Lower Bracket; Bracket, Engine Mounting. The part 10232891 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 10232891. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.