How to service and repair the Brake Disc using the J41013 and J42450-A kits on 2002 Buick LeSabre?

Begin the repair of the Brake Disc. Look at every disc Brake Disc to see if the surface is worn out, if there is lateral runout, and make sure it is still above the minimum allowed size after resurfacing. When refinishing because the parts are corroded, cracked, or scored beyond standards, fit the Brake Disc to the brake lathe as the manufacturer says, and check that everything is clean. Let the lathe run while you move the cutting tools toward the disc friction surfaces and look at the witness mark to make sure they are mounted properly. Use the manufacturer's guide to refinish the disc, keep checking the thickness after every cut, and fit a new disc if it gets too thin. You can get a non-directional finish by using the recommended speed and 120 grit aluminum oxide sandpaper if you have a non-directional tool, or with 150 grit sandpaper and a sanding block if you don't. Once you are done, wipe each friction surface with denatured alcohol or brake cleaner, then take the disc off the lathe.

OEM 2002 Buick LeSabre Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Discs found

View related parts
2002 Buick LeSabre Rotor, Front Part Number: 19202731
Product Specifications
- Other Name: Rotor, Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 18060230, 18060640, 18060240, 19152695, 18021015, 18026591
- Item Weight: 21.20 Pounds
- Item Dimensions: 12.7 x 13.0 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19202731
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2002 Buick LeSabre Rotor Part Number: 18060236
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Brake Rotor
- Position: Rear
- Replaces: 18022401
- Item Weight: 10.90 Pounds
- Item Dimensions: 13.3 x 13.3 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 18060236
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
2002 Buick LeSabre Brake Rotor, Front Part Number: 19303831
$34.00 MSRP: $139.00
You Save: $105.00 (76%)
Product Specifications
- Other Name: Rotor Assembly, Front Brake; Disc Brake Hardware Kit; Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 18021359, 18060233
- Item Weight: 16.80 Pounds
- Item Dimensions: 13.2 x 12.9 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19303831
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2002 Buick LeSabre Brake Disc

With a comprehensive array of OEM 2002 Buick LeSabre Brake Disc, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Buick LeSabre Brake Disc are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Buick LeSabre Brake Disc Parts and Q&A

Q: How to service and repair the Brake Disc using the J41013 and J42450-A kits on 2002 Buick LeSabre?
A: Begin the repair of the Brake Disc. Look at every disc Brake Disc to see if the surface is worn out, if there is lateral runout, and make sure it is still above the minimum allowed size after resurfacing. When refinishing because the parts are corroded, cracked, or scored beyond standards, fit the Brake Disc to the brake lathe as the manufacturer says, and check that everything is clean. Let the lathe run while you move the cutting tools toward the disc friction surfaces and look at the witness mark to make sure they are mounted properly. Use the manufacturer's guide to refinish the disc, keep checking the thickness after every cut, and fit a new disc if it gets too thin. You can get a non-directional finish by using the recommended speed and 120 grit aluminum oxide sandpaper if you have a non-directional tool, or with 150 grit sandpaper and a sanding block if you don't. Once you are done, wipe each friction surface with denatured alcohol or brake cleaner, then take the disc off the lathe.