OEM 2002 Cadillac Seville Coil Springs

2002 Cadillac Seville Coil Springs Parts Questions & Experts Answers

• Q: How to service and repair the front coil springs and shock absorber on 2002 Cadillac Seville?

  A: Start the process of suspension strut service and repair by obtaining these tools in order: a the required tools include holding fixture (J3289-20), strut spring compressor (J34013-B), damper rod clamp (J34013-20), and alignment rod (J34013-38). Holding fixture (J3289-20), strut spring compressor (J34013-B), damper rod clamp (J34013-20), and alignment rod (J34013-38). Prior to removing the strut from the vehicle ensure you protect the suspension coil spring coating from damage because premature failure occurs when such damage appears. The strut spring compressor (J34013-B) accepts the strut assembly before threading the spring compressor screw to slightly compress the spring. Hold the strut shaft in position then loosen the strut shaft nut before attaching the alignment rod (J34013-38) to pull the strut shaft out of the strut assembly. The screw on the spring compressor should be turned while you guide the shaft forward until the strut and spring can fully exit. Begin installation by positioning the damper rod clamp (J34013-20) on the strut shaft before inserting the spring over the strut assembly into the correct position. Do this while detaining the upright configuration of the assembly. Follow this procedure by inserting the upper spring seat bearing into its original position when working with the vehicle's centerline. Also normalize face orientation of the spring's tab toward the center. Use the alignment rod (J34013-38) together with the strut to lead the shaft into position while tightening the compressor screw by hand until three threads show through the strut top. Slide in the washer while you remove the damper rod clamp (J34013-20) from the strut shaft before tightening the strut mount nut to 75 nm (55 ft. Lbs.). After removing the strut from the compressor install the strut back into its proper position in the vehicle.