How to replace the outer tie rod end on 2002 Chevrolet Camaro?

The first step to replacing an outer Tie Rod End starts with hoisting the vehicle in the air then removing its wheel and tire. The first step requires users to eliminate both the cotter pin and the hex slotted nut which secure the outer Tie Rod . Subsequently, they should loosen the jam nut which holds the inner Tie Rod . First detach the outer Tie Rod from the Steering Knuckle through use of the universal steering linkage puller (J 24319-B). Next remove the outer Tie Rod from the inner Tie Rod. The installation process begins with attaching the unfitted outer Tie Rod to the inner Tie Rod yet leaves the jam nut untouched before connecting the outer Tie Rod to the Steering Knuckle. Tighten the hex slotted nut that secures the outer Tie Rod stud to 47 nm (35 ft. Lbs.) but adjust it up to 1/6 turn additional for proper alignment of the cotter pin . After installing the cotter pin into the Tie Rod stud center it is necessary to adjust the front toe before pushing the hex slotted nut fully tight.

OEM 2002 Chevrolet Camaro Tie Rod

Steering Tie Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Tie Rods found

View related parts
2002 Chevrolet Camaro Inner Tie Rod Part Number: 15221006
$71.84 MSRP: $175.34
You Save: $103.50 (60%)
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Inner Tie; Steering Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Inner; Rod Kit, Steering Tie Rod Outer
- Position: Inner
- Replaces: 21011026, 26075038, 26034348
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.2 x 4.0 x 19.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15221006
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
2002 Chevrolet Camaro Tie Rod, Outer Part Number: 21011027
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Outer Tie Rod; Rod Kit, Steering Tie Rod Outer; Rod, Steering Tie Rod Outer
- Position: Outer
- Replaces: 26026743
- Item Weight: 1.50 Pounds
- Item Dimensions: 6.1 x 4.6 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 21011027
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS

2002 Chevrolet Camaro Tie Rod

With a comprehensive array of OEM 2002 Chevrolet Camaro Tie Rod, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Camaro Tie Rod are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Camaro Tie Rod Parts and Q&A

Q: How to replace the outer tie rod end on 2002 Chevrolet Camaro?
A: The first step to replacing an outer Tie Rod End starts with hoisting the vehicle in the air then removing its wheel and tire. The first step requires users to eliminate both the cotter pin and the hex slotted nut which secure the outer Tie Rod . Subsequently, they should loosen the jam nut which holds the inner Tie Rod . First detach the outer Tie Rod from the Steering Knuckle through use of the universal steering linkage puller (J 24319-B). Next remove the outer Tie Rod from the inner Tie Rod. The installation process begins with attaching the unfitted outer Tie Rod to the inner Tie Rod yet leaves the jam nut untouched before connecting the outer Tie Rod to the Steering Knuckle. Tighten the hex slotted nut that secures the outer Tie Rod stud to 47 nm (35 ft. Lbs.) but adjust it up to 1/6 turn additional for proper alignment of the cotter pin . After installing the cotter pin into the Tie Rod stud center it is necessary to adjust the front toe before pushing the hex slotted nut fully tight.