How to replace the engine mount on 2002 Chevrolet Impala?

The first step in replacing the Engine Mount requires you to disconnect the battery ground cable before removing the throttle body air inlet duct. The first step involves removal of the Engine Mount struts after which you should use suitable support to lift the vehicle. The first step involves disconnecting three-way catalytic converter pipes from the back of the right Exhaust Manifold then taking off the right tire wheel and right engine splash shield. The (universal engine support fixture) allows you to elevate the engine after removing the Engine Mount lower nuts. The first step should involve removing Engine Mount bracket bolts that secure it to the Oil Pan while removing the Engine Mount and bracket afterward. Detach the upper nuts from the Engine Mount before separating it from the Engine Mount bracket assembly. The installation process requires mounting the Engine Mount onto the Engine Mount bracket with upper nuts tightened to 47 nm (35 ft. Lbs.). Fitting the Engine Mount bracket to the Oil Pan along with the Engine Mount requires bolts to reach 43 ft. Lbs (58 Nm) torque. Lift the vehicle followed by lowering the engine and proceed with mounting the lower engine nuts at 43 nm (32 ft. Lbs. Torque). Reinstall right engine splash shield while you put back the right front wheel with tire and establish three-way catalytic converter pipe nodes with right rear Exhaust Manifold. The procedure concludes with lowering the vehicle to remove the engine support fixture while you reinstall the mount struts and duct before reconnecting the battery grounding cable.

OEM 2002 Chevrolet Impala Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Engine Mounts found

View related parts
2002 Chevrolet Impala Strut Mount
Part Number: 10271462
$207.03 MSRP: $325.75
You Save: $118.72 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Torque Strut Mount; Engine Mount Bracket; Motor Mount; Strut Bracket; Lower Bracket; Strut Front Bracket
- Item Weight: 2.40 Pounds
- Item Dimensions: 7.6 x 6.9 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10271462
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.8 L GAS
View related parts
2002 Chevrolet Impala Strut Mount
Part Number: 10420009
$49.26 MSRP: $77.17
You Save: $27.91 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Strut; Motor Mount; Strut; Strut, Engine Mounting
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.6 x 3.2 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10420009
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- Base, LS, LS Sport, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
2002 Chevrolet Impala Motor Mount
Part Number: 10448575
$74.19 MSRP: $116.21
You Save: $42.02 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Engine Mount Dampening; Engine Mount Torque Strut; Engine Mount Bracket; Spring Insulator; Lower Mount; Mount Insulator; Mount; Mount, Engine Mounting; Engine Mount
- Replaces: 17998813, 22113282, 22178657, 22146018, 22175206, 10340740, 10448574, 10448576, 22146466
- Item Weight: 4.20 Pounds
- Item Dimensions: 11.6 x 5.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10448575
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2002 Chevrolet Impala Strut Mount
Part Number: 10232891
$137.10 MSRP: $195.31
You Save: $58.21 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Lift; Torque Strut Mount; Motor Mount; Mount Bracket; Strut Bracket; Strut Mount Bracket; Strut Lower Bracket; Bracket, Engine Mounting
- Item Weight: 2.20 Pounds
- Item Dimensions: 8.4 x 4.7 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10232891
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- Base | 6 Cyl 3.4 L GAS
View related parts
2002 Chevrolet Impala Strut Bracket, Driver Side
Part Number: 24503458
Product Specifications
- Other Name: Bracket, Engine Lift; Engine Mount Bracket; Transmission Mount; Motor Mount; Engine Bracket; Lift Bracket; Upper Bracket; Strut Front Bracket; Bracket; Bracket, Engine Mounting
- Position: Driver Side
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.0 x 6.2 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24503458
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.8 L GAS
View related parts
2002 Chevrolet Impala Mount Bracket
Part Number: 12594433
Product Specifications
- Other Name: Bracket-Engine Mount Strut & Engine Lift; Engine Mount Bracket; Transmission Mount; Motor Mount; Strut Bracket; Lift Bracket; Rear Brace; Engine Mounting Bracket; Engine Lift Bracket
- Replaces: 10154776, 12570320
- Item Weight: 4.80 Pounds
- Item Dimensions: 4.3 x 4.4 x 15.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12594433
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LT, LTZ, Police | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2002 Chevrolet Impala Mount Bracket
Part Number: 10321856
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Engine Bracket; Bracket
- Replaces: 10243884
- Item Weight: 2.30 Pounds
- Item Dimensions: 12.1 x 12.6 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10321856
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.8 L GAS
View related parts
2002 Chevrolet Impala Mount Bracket
Part Number: 10216970
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Transmission Mount; Motor Mount; Engine Bracket; Lower Bracket; Bracket
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.2 x 3.5 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10216970
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LT, LTZ, Police | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2002 Chevrolet Impala Mount Bracket
Part Number: 24504390
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Transmission Mount; Motor Mount; Strut Bracket; Engine Bracket; Compressor Mount Bracket; Torque Strut Bracket; A/C Compressor Mounting.
- Item Weight: 5.70 Pounds
- Item Dimensions: 4.4 x 4.3 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24504390
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- Base | 6 Cyl 3.4 L GAS
View related parts
2002 Chevrolet Impala Strut Bracket, Passenger Side
Part Number: 24506488
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Engine Bracket; Upper Bracket
- Position: Passenger Side
- Item Weight: 2.10 Pounds
- Item Dimensions: 6.2 x 5.7 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24506488
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.8 L GAS
View related parts
2002 Chevrolet Impala Strut Bracket, Passenger Side
Part Number: 24506489
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount; Engine Bracket; Lower Brace
- Position: Passenger Side
- Item Weight: 1.50 Pounds
- Item Dimensions: 5.9 x 4.2 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24506489
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Impala Submodels:
- Base, LS, LS Sport, SS | 6 Cyl 3.8 L GAS

2002 Chevrolet Impala Engine Mount

With a comprehensive array of OEM 2002 Chevrolet Impala Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Impala Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Impala Engine Mount Parts Questions & Experts Answers

Q: How to replace the engine mount on 2002 Chevrolet Impala?
A: The first step in replacing the Engine Mount requires you to disconnect the battery ground cable before removing the throttle body air inlet duct. The first step involves removal of the Engine Mount struts after which you should use suitable support to lift the vehicle. The first step involves disconnecting three-way catalytic converter pipes from the back of the right Exhaust Manifold then taking off the right tire wheel and right engine splash shield. The (universal engine support fixture) allows you to elevate the engine after removing the Engine Mount lower nuts. The first step should involve removing Engine Mount bracket bolts that secure it to the Oil Pan while removing the Engine Mount and bracket afterward. Detach the upper nuts from the Engine Mount before separating it from the Engine Mount bracket assembly. The installation process requires mounting the Engine Mount onto the Engine Mount bracket with upper nuts tightened to 47 nm (35 ft. Lbs.). Fitting the Engine Mount bracket to the Oil Pan along with the Engine Mount requires bolts to reach 43 ft. Lbs (58 Nm) torque. Lift the vehicle followed by lowering the engine and proceed with mounting the lower engine nuts at 43 nm (32 ft. Lbs. Torque). Reinstall right engine splash shield while you put back the right front wheel with tire and establish three-way catalytic converter pipe nodes with right rear Exhaust Manifold. The procedure concludes with lowering the vehicle to remove the engine support fixture while you reinstall the mount struts and duct before reconnecting the battery grounding cable.

Related 2002 Chevrolet Impala Parts

Alternate Year Models

2001 Chevrolet Impala Engine Mount 2003 Chevrolet Impala Engine Mount